Question 1

What happens if I have problems with my new windows?

Accepted Answer

Ultimately the double glazing company you use is responsible for the quality of work and to ensure your windows are of an excellent standard. This is why it’s important to get a warranty and use a Fensa registered installer. If problems emerge within a couple of years then it’s likely the installation was of a poor standard.Contact the double glazing company and have the issue repaired or new windows replaced. This doesn’t matter if you received a discount of free windows as part of the deal. As long as you entered into a contract the company is obliged to restore the windows.

Question 2

What happens if I have problems with my new windows?

Accepted Answer

Ultimately the double glazing company you use is responsible for the quality of work and to ensure your windows are of an excellent standard. This is why it&rsquo;s important to get a warranty and use a Fensa registered installer. If problems emerge within a couple of years then it&rsquo;s likely the installation was of a poor standard.Contact the double glazing company and have the issue repaired or new windows replaced. This doesn&rsquo;t matter if you received a discount of free windows as part of the deal. As long as you entered into a contract the company is obliged to restore the windows.

Question 3

do you need planning permission for a porch?

Accepted Answer

There are so many benefits that comes with building a porch in your home premises. It’s an extra space where a lot can be achieved such as drying a dripping wet dog, taking off your dirty shoes or boot and lots more. So if you’re considering to construct a porch, it’s definitely going to be a wise decision. However, before you get started, there’s a need to determine if you’ll need planning permission for a porch. It’s important to take note that planning laws are dynamic and can be updated at any point, so be sure only to use trusted sources only as your guide. If you’re the homeowner or landlord, it’s entirely your responsibility to obtain the right approval for any development project you wish to carry out within your premises.

A Porch can not be termed as an extension and neither is it a conservatory, they’re basically built to the home’s front covering the main entrance using a stone base or a brick. As a result, a porch does not need planning permission due to the fact that it’s covered by the permitted development rights if the specific guidelines for porches are complied with. Below are the instances where you WILL need planning permission for a porch.

✓ If the floor space is more than 3sqm (the wall inclusive).

✓ The highest point has a height of more than 3 metres.

✓ If the porch is situated within 2 metres of a boundary directly facing on to the road.

You may need planning permission if the house is a listed building, designated area or falls under an Article 4 Direction.

In order to build a porch without planning permission, you need to consider all the criteria stated above. You can also visit the Planning Portal website to get more detailed information before getting started.

Question 4

how to fit a double glazed window?

Accepted Answer

Did you just purchase a double glazed window and confused about how to have it installed? Fitting the window yourself can be quite easy with the help of this step by step guide. However, if you lack proper training or experience, we’d recommend you reach out to a trustworthy professional who can guarantee the best results for help. That said, now let’s take a look at the process.

• Remove the old windows by detaching the old beading and glass window safely. Then make some interval cuts using a hand saw before using a crowbar to pry it out.

• Cut the external double glazed window seal. Once done, take a measurement of the window area’s width once empty. Then transfer the measurement to the window sil to face outside and cut using a handsaw.

• Seal the window sil. Add a bead of clear silicone along both inside lip as well as the centre to seal the sil.

• Screw the double glazed window to the sil. Position the window on the top of the lipped section that was siliconed. Then pre-drill them together and screw in three places. You should make sure the screws do not go totally to the sil’s bottom.

• Install the double glazed window. After successfully screwing the double glazed window to the sil, you can now fit in the double glazing. Make use of packers to make sure it’s even in the slot.

• Screw the uPVC window to the wall. If you’re happy and satisfied with the position of the window, you can then pre-drill through the frame of the window and the brick wall. Once done, simply screw it in place using masonry screws or Spax screw as they do not require crawl plugs in bricks.

• Seal around the window. To do this, simply fill any gaps with expanding foam, wipe out the excess and seal with silicone.

Question 5

Should I get all my windows replaced at once?

Accepted Answer

You don&rsquo;t have to, especially if you&rsquo;re on a budget. If you&rsquo;re only replacing some, it&rsquo;s a good idea to get all the windows on one side of your property replaced at the same time, so they all look the same. Be aware, obviously, huge savings could be had by having a number of windows replaced at the same time.

Question 6

How much does one double glazed window cost?

Accepted Answer

How much one double glazed window costs is based on a few factors. If you just want to buy the window to install yourself, it will cost less than if you want an installer to fit it for you. If you want to simply buy one double glazed window without installation it could cost anywhere between £100-£300. That’s for a simple casement window, but other types like sash or tilt and turn windows could cost more. It’s recommended that you get a reputable installer to fit your double glazed windows because they’ve had the relevant training and will be able to install it much more quickly. How much it will cost for them to install one double glazed window will very based on your location, the type of window, how difficult the window is to access and whether you choose standard white uPVC or a coloured or woodgrain effect. An average uPVC casement window might cost somewhere between £300-£400, while a dual turn window might cost between £550-£660 to install. Do you really need to replace the entire window? If it’s just the double glazing that needs replacing, for example if it’s misted up inside, this will cost much less. Most window installers or a glazier will be able to just replace the sealed unit inside, and that may cost as little as £250. It’s always best to get a range of quotes from reputable companies so you know you’ve got a great price and you’re sure you’ll get excellent service.

Question 7

How to fix a cracked glass window?

Accepted Answer

You can end up with a cracked glass window in a few ways. The most common one is when a rogue stone in the lawnmower hits the window or someone’s cricket or tennis game goes wrong and you end up with a ball through the window. Youi often end up with a ‘bullseye’ type crack that expands out from the point of impact. You can also get pressure and stress cracks from intense fluctuations in pressure and temperature. Unfortunately, there’s no way you can permanently fix cracked windows without replacing the entire sealed unit. An installer can replace a cracked glass window in less than an hour simply by taking out the sealed unit (the two panes of glass in double glazed windows) and replacing it with a new one. It costs an average of £110, but you could try to do it yourself for around £55. But what if you can’t get an installer to fix your window straight away? There is a DIY method you could try. As a temporary fix for your glass window, you can use a solvent-based adhesive like epoxy which will keep the glass intact and prevent further damage. You’ll also need: Washing up liquid Glass cleaner A lint-free cloth or rag A putty knife A paper plate Acetone First, you’ll want to clean the glass using the washing up liquid and a damp cloth to remove any dust or oils. Leave it for a few minutes to dry, then create a mixture of epoxy by combining the hardener and the resin and stirring it on a paper plate. Using the putty knife, spread the mixture on the cracks, making sure you press gently to fill them. Leave it for at least 5 minutes to dry, then get rid of any excess by using some acetone on a dry cloth. Clean the window using some glass cleaner and another dry cloth, and you should have a temporary fix!

Question 8

how to fit a double glazed window?

Accepted Answer