Wooden Conservatories Installers in Cambridge

When people talk about finishes on a wooden conservatory, there are a few different things that they may be referring to. Some may be referring to the colour and type of wood used to build the conservatory, but they may also be talking about the type of treatment used to protect the wood from the weather. We’ll cover both bases for what finish is best on a wooden conservatory here.

When you’re thinking about the best wood type and finish for the conservatory, it’s best to go with a hardwood. There are both hardwoods and softwoods, and hardwoods are the most durable. Oak is the most expensive choice but is also the most durable, so lots of people decide to go for this option. Other good choices that are slightly cheaper are Brazilian cedar and idigbo. Softwoods like European redwood or Siberian larch are cheaper still, but they won’t last as long, so it may work out more cost-effective to spend more on a hardwood.

Wood is a natural material, so it’s important to look after your wooden conservatory to prevent it from rotting or getting attacked by bugs and pests. Your conservatory will be exposed to all weathers, so you’ll need to use a good finish to ensure that it stays in tip-top condition for years to come. Your installer should be able to tell you what’s best, but some of the best finishes for a wooden conservatory include breathable varnishes and decking oil. However, if you do use an oil, it’s best to use a preservative treatment too; oil will only repel water. Joints are particularly susceptible to water penetration, so make sure you use a good wood treatment and focus on areas where water would pool during rain. Then you can apply a decking oil afterwards.

When you build a new wood-constructed conservatory, or any type of conservatory, you’ll need to dig a trench for the footings. You’ll need to dig to a minimum depth of 600mm and at least 300mm below your property’s damp proof course. When you dig down, you might expose obstacles such as underground pipes.

If this happens, you’ll need lintels for your wood-constructed conservatory. These are usually concrete and protect the pipes or obstructions from being crushed. You may also want to use steel mesh for additional support.

Building Regulations state that if an opening is formed in a wall, the structure above the opening needs to be supported. This will be especially relevant if you’re building a wooden lean-to conservatory. It says that there are two ways that you can use lintels to provide support.

The first way involves using a steel lintel to support both the inner and outer leaf of a cavity wall. It can then serve as a cavity tray that directs moisture from the cavity through the outer skin of the wall as well.

The second way to use lintels is to use two steel or concrete lintels. They support each leaf of a cavity wall construction. You’ll need separate thermal insulation and a cavity tray as well.

Whatever type of lintel you use, it should have a suitable bearing onto the wall at each side. If you’re not sure, speak to the manufacturer of your wood-constructed conservatory, or ask a reputable company to install it for you.

• The rules only apply to houses – flats and maisonettes are not included
• Only 50% of the area of land around the original house can be covered by extensions, including conservatories, and other buildings
• You mustn’t build the conservatory higher than the highest part of the original roof
• Where the wooden conservatory comes within 2 metres of the boundary, the height at the eaves can’t exceed 3 metres
• A rear wooden conservatory can’t extend beyond the rear wall of the original house by more than 4 metres if it’s a detached house, or more than 3 metres for any other type of house
• For side extensions, for example a lean-to wooden conservatory, it can’t exceed 4 metres in height and can only be up to half the width of the original house

You might think that all wooden conservatories are the same. But there are actually lots of differences between them, and some conservatories are better than others. One of the most important factors to consider when you’re looking for a wooden conservatory is the type of wood that it’s made from. Generally, there are two different types to look out for: softwood and hardwood. So what wood should be used for a wooden conservatory?

Softwood conservatories are usually made from European redwood or Siberian larch. These types of conservatories are the cheapest wooden conservatories you can buy because the wood grows much faster than hardwoods. However, due to their soft nature, they may only last 7-15 years, reducing their cost-effectivity.

The best wood to use for a wooden conservatory is a hardwood. The most expensive type is oak, but you get what you pay for – it looks fabulous and it can also be coated with a bug and pest-resistant solution to increase its longevity. If you haven’t got the budget for oak, other hardwood options include Brazilian cedar, idigbo and luan, which are still great choices. Make sure you speak to your conservatory installer about the ‘closeness’ of the wood grains, as close-grained hardwoods are said to be the most suitable for conservatories. You should also check that your supplier has strict control of the quality of the wood so can ensure that it’s been well seasoned and prepared for use in construction.