Damp Proofing in Nairn
Extensions such as garage conversions will typically require supplementary damp proofing to be installed during the conversion, as the existing garage normally has a single skin design for walls and floors, which was not designed to comply with building regulations for habitable rooms. This damp proofing will need to be added to walls and floors. Furthermore, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be performed by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this might have to be improved as part of the conversion in order to adhere to current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting gradually as moisture sets in. This can be carried out by either making use of damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to comply with, therefore is it important to make sure that your garage conversion incorporates suitable damp proofing methods.