Damp Proofing in Saundersfoot
Extensions including garage conversions will usually require supplementary damp proofing to be installed during the conversion, as the existing garage will typically have a single skin design for walls and floors, which was not designed to be in accordance with building regulations for habitable rooms. This damp proofing should be put into walls and floors. In addition, the roofing of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will often be achieved by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this might need to be improved as part of the conversion to be able to meet current building regulations. The walls should be damp proofed in order to safeguard the brickwork from rotting gradually as moisture sets in. This can be carried out by either making use of damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is a part of the building regulations that the garage conversion should comply with, therefore is it necessary to make sure that your garage conversion employs appropriate damp proofing methods.