Damp Proofing in Tenby
Extensions including garage conversions will usually require supplementary damp proofing to be installed during the conversion, as the existing garage routinely has a single skin design for walls and floors, which was not designed to be in accordance with building regulations for habitable rooms. This damp proofing should be added to walls and floors. In addition, the roof of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by employing a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this might have to be updated as part of the conversion to be able to adhere to current building regulations. The walls should be damp proofed in order to safeguard the brickwork from rotting gradually as moisture sets in. This can be carried out by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is a part of the building regulations that the garage conversion should comply with, and so is it vital to ensure that your garage conversion incorporates suitable damp proofing methods.