Sewer Clearing in Balham

If you feel your sewer line is clogged, the best course of action is to have it cleared as soon as possible and even more so, by an experienced professional. When left untreated, this can lead to water leakages which can damage your home or business facility. And in serious situations, it can lead to pipe burst which will definitely cost you a lot more money to fix when compared to taking a quick action to unclog the sewer line blockages. If you’re thinking about hiring a professional, then you’d probably want to know how much its going to cost. In this post, we’re going to look at the cost of clearing a sewer line and the possible influencing factors.

The cost of clearing sewer lines depend on a number of factors. These factors include the type of the blockage, the method used, the location of the property as well as the ease of access. Using the blockage type as an example, a small blockage in a toilet or sink is usually priced within the range of £50 to about £70. However, for an extensive blockage deep in your sewer lines, you may end up incurring anything within the range of £150 to about £200.

There are also a bunch of methods that can be used to clear blockages from a sewer line which will also play a key role in the final cost of the service. These methods include drain jetting which usually costs within the range of £70 to £175, drain rodding from £80 to about £145 as well as a full system scrub which should cost about £150 to £200.

Do note that the above costs are just an estimate and other factors as mentioned earlier on will also come into play.

Did you just arrive home after spending some time away? Immediately you turn the door knob and walk in, you perceive an unpleasant sulfuric odour. The questions that arises are many, you simply don’t know whether its your sewer line or perhaps something else. But one thing you know is, an air that smells that bad shouldn’t be ignored. And that’s totally right! A gassy smell in your home or property is always a sign that something is wrong and should never be overlooked until you’ve been able to get a better information since you may make a critical judgement error. Hence, it’s important to always educate oneself first in order to know the best thing to do after smelling gas.

When it comes to sewer gas, it possesses a sulfuric odour just like natural gas. However unlike natural gas, sewer gas smells a bit more unpleasant - more like an egg that’s rotten and less like a skunk. This is usually as a result of a back up of sulfides, methane, ammonia as well as other inorganic compounds. When in small quantity ( as it is in most homes), sewer gas is quite harmless even though the smell isn’t something you’d like to live with or want any of your visitors to be welcomed with. However, this smell can be dangerous when it comes in high doses such as in a deep sewage tunnel.

Most sewer issues come from a number of locations which includes the p-traps, unconnected pipes, damaged line, damage vent, cracked seal as well as foundation cracks. Although little doses of sewer gas lead to health problems, it isn’t an excuse to overlook the problem. Call in a specialist and while at it, you can also schedule a plumbing inspection every year.

Before you start digging, you should know sewer lines are required to be buried within certain specifications and it’s your responsibility to find out what these specifications are. If you’re thinking about the appropriate depth of sewer line, then you’ve come to the right place! In this post we’re going to consider how deep a main sewer line should be buried underground.

First and foremost, you should understand that sewer lines are simply the intestinal systems of a house or property. Their primary function is to totally remove waste water and other waste matter from your drains, toilet, shower, dishwasher as well as the exterior faucets. With this in mind, we can then move to our main concern which is the sewer line depth. In a world that’s perfect, you’d be allowed to to just dig your home’s sewer line deep enough to cover it with a thin layer of sod. However, if you happen to reside in an environment with deep running cold, this inclement weather may just freeze up your waste right in the pipe due to the fact that it’s placed too close to the surface where there’s not enough warmth. This could also extend to other harsh weather conditions such as heavy wind and hurricanes which are able to tear out ground deep down and even more so, if it were to pull up trees that are close by with deep roots. Hence, the need to get the appropriate depth of sewer lines right.

Sewer lines depth can vary greatly - they can be as shallow as 12 to 30 and can be as deep as 6+ feet. This is often determined by the climate.

Sewer is simply a set of pipes or drains that’s usually underground and whose primary function is to remove waste water as well as other waste materials. Generally, there are three main types of modern sewer systems and they include sanitary sewers ( also commonly referred to as foul sewers), storm sewers or surface water sewers as well as combined sewers. Now let’s take a look at each of the sewer types!

• Sanitary sewers or foul sewers. These are the sewer systems that are mainly incorporated to transport waste water and other waste matter from both homes and businesses to waste water treatment plants. Normally, they include pipes, manholes as well as pumping stations. Their function is, however, not only to carry waste water to treatment plants, but also to maintain the water quality as this is essential for public health. Here, gravity is commonly used to remove the waste water. However, in low lying areas, pumps can be incorporated especially when the waste water needs to reach an area that’s at a higher elevation
• Storm sewers or surface water sewers. The primary function of this sewer system is to carry rain water as well as melting snow ( unlike sanitary sewers that are designed to carry waste water) from the roofs and roads and then direct it straight into the streams, rivers and also other water bodies. These sewer systems can get clogged with leaves, litter and other debris which can ultimately lead to flooding.
• Combined sewer. As the name suggests, these sewers are combined. This implies that the make use of a single pipe to carry both waste water and storm runoff water to wastewater treatment plants. These aren’t very common anymore as the sewer can overflow especially when there’s a lot of rain which makes the system incapable to handling both the waste water and surface water.