Searching for tile or slate roofing contractors in Kington? Our tile and slate roofing contractors within Kington can offer the perfect quotations to have a whole new roof constructed or repaired.
Tile and slate are probably the two preferred materials in Britain with regard to roof construction, with the strength and potential to deal with weather both equally popular factors with British homeowners. With a selection of colours to set your property aside from the crowd you have the opportunity to give a distinctive appeal to your house.
Colours to choose from include black, grey and red, therefore ensure to look for something which fits your existing home. With little maintenance required over a 75-year lifespan, you're certain to have something that will look good for many years.
With the range of colours to choose from combined with the low maintenance and wonderful durability qualities, choosing a tile or slate roof is often times a good choice for householders.
We will provide up to four tile or slate roofing companies locally, who'll provide quotations for the work you want undertaken. You'll get a household visit from specialists in Kington who will assist you to pick the suitable material for your house before completing the construction.
The installation of a tile or slate roof will take a few days to a few weeks, depending on size and pitch of the roofing, in addition to the volume of workers undertaking the project.
The regular cost of Tile or slate roofing is £6000. Costs can change based upon the materials and the organisation hired. The upper price range can be as high as £6900. The material costs are normally approximately £1500
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£7400
£5550
£3700
£1850
£0
| Labour cost | £4,200 | |
| Material cost | £1,500 | |
| Waste removal | £300 |
Requests for quotations in Kington in May 2026
Requests for Tile or slate roofing quotations in Kington in May 2026. 0% change from April 2026.
Requests for Tile or slate roofing quotations in Herefordshire in May 2026. 0% change from April 2026.
We noted 149 requests for home quotes in Kington. Of these quote requests the amount of tile or slate roofing quotes within Kington was 0. Quotatis would have been in a position to match these customers with as many as 4 suitable contractors who were available for work within Kington at that time. Request a free home survey from reliable companies within Kington.
Source: Numbers calculated based on the search volumes in major search enginesKington is a market town, selecting ward and also civil parish in Herefordshire, England. According to the Parish, the ward had a population of 3,240 while the 2011 census had a population of 2,626. The name 'Kington' is derived from King's-load, being Anglo-Saxon for "King's Town", comparable to various other close-by towns such as Presteigne significance "Priest's Town" and also Knighton being "Knight's Town". Kington is to the west of Offa's Dyke so most likely this land was Welsh in the 8th century AD. The land was held by Anglo-Saxons in 1066, but ruined. After the Norman Conquest Kington then passed to the Crown on the downfall of Roger de Breteuil, 2nd Earl of Hereford in 1075. Before 1121 King Henry I provided Kington to Adam de Port, who started a new Marcher barony in this part of the very early Welsh Marches. Kington seems to have actually been a silent barony and also was associated with the workplace of sheriff of Hereford. In 1172, Adam de Port, probably the great-grandson of Henry Port, rebelled as well as got away the country. He returned in 1174 with a Scottish army, just to leave from the resulting Battle of Alnwick to the excellent mirth of the Norman court. With this his barony of Kington was taken by the Crown and also ended up being an appurtenance of the office of Sheriff of Hereford, ultimately being granted to William de Braose, fourth Lord of Bramber in 1203 for £100. The castle after that saw action in the Braose Wars versus King John of England and was likely to have actually been damaged by imperial forces in August 1216. Within a few years a new citadel was begun as well as the neighboring Huntington Castle and Kington Castle were abandoned. All that stays of Kington Castle today is an excellent outcrop of rock covered by a couple of fragmentary earthworks. The old town clustered around the castle and also Norman church in addition to a protective hill above the River Arrow. St Mary's church, located on higher ground over the town centre. 'Chingtune' was recorded in the Domesday Book in 1086, the name meaning Kings Town or Manor, high on capital above the community where St. Mary's Church currently stands. The new Kington, called Kyneton in the Fields, was outlined between 1175 and 1230 ashore bordering the River Arrow as well as possibly assigned as part of the Saxon open field system. Located on the direct route the drovers drew from Hergest Ridge and also with 8 yearly fairs, Kington grew in value as a market community and also there is still a growing animals market on Thursdays. The community maintains the middle ages grid pattern of streets and back lanes. In the chapel of St. Mary's Church, there is the alabaster burial place of Sir Thomas Vaughan of nearby Hergest Court, slain at the Battle of Banbury 1469, and his partner, Elen Gethin. The ghost of Sir Thomas, as well as likewise that of the Black Dog of Hergest are stated to haunt the location around Hergest Ridge. The Black Dog's sighting reputedly presages death. It is also rumoured to have actually been the prototype for The Hound of the Baskervilles as Conan Doyle is known to have remained at neighboring Hergest Hall quickly prior to he wrote the novel.
About Pro-Fit Plastics Ltd We are based in the Midlands and offer our services across the following areas: Coventry Redditch Birmingham Rugby The West Midlands including; Warwickshire & Worcestershire The East Midla...
Billy and his boys done excellent work.
TRIMSEAL are the area's largest suppliers of plastic building products and accessories. We hold huge stocks of most popular lines of PVCu cladding, fascias, soffits, guttering and down-pipes as well as all the trims, sealants, adhesives and fixings t...
very helpful and came the next day to give me a quote
Vey good
Based centrally in Tewkesbury, we cover a wide area spanning over 30 miles. No job is too big or too small and all work undertaken by our roofer is fully guaranteed and insurance backed. We don’t charge for call out, or travel. You will find our pr...
No measuring just gave a quote didn't seem interested.
Answer a few quick questions, so we can match you with local roofers who can help.
Get free, no-obligation local tile or slate roofing quotes from 4 verified roofers working in Kington.
Compare customer reviews, services and prices, and choose the right tradesperson for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love Local Quotes it's a big part of my Business I would recommend to anyone
The task of installing a tile roof can be quite a difficult one. Such a project takes a great deal of preparation, well before the actual tile installation is done. It does not matter if you are putting new ones or replacing your old tiles, understanding the proper technique and steps become crucial.
Remove old roofing (if applicable).
This is, on its own, a major job that can take days and require special tools. It takes some time, but be prepared to do it right.
Install battens (if applicable).
Battens may be needed to hold the tiles in place if the roof is having a steep slope. Usually made of metal or wood, battens are generally 1 inch thick and run horizontally along the roof.
You can find several varieties of tiles that has a hook or a lip allowing it to hang on the available battens. Apart from this, you can find several clips in the market which help to attach the tiles on to the batten.
Determining the spacing for battens can be done easily using two tiles. To prevent interlocking, a three inch overlap is required at the minimum, and a smaller amount of overhang should be left over the eaves. Keep this in mind when you determine the locations of the battens.
After you have determined the distance between the first two battens, measure the distance and set battens using that spacing up, making sure to double-check measurements as you go along.
• Install the tiles.
• You will need to begin with one side first, and then continue to move along the length of the roof.
• Cut tiles to fit tight spots.
• Tiles have to be cut precisely to overcome any obstacle like the chimney.
• Install the ridge tiles.
After completing the broad surfaces of the roof, special ridge tiles are required to cap the top.
Roofing is one of the most significant portions of your household. Not only does it protect the inhabitants from the elements, but it also plays a vital role in the architectural appeal. When people reflect of roofing, they consider various types of tile for the job.
Metal Tiles
When we talk of metal roofs, most of the people think of roofs made of metal panels which are joined together by joints or raised seams. This is often not the case as there are several numbers of obtainable metal roofing products.
Ceramic Tiles
Another popular choice of roofing material is ceramic. Clay tiles are incombustible and fairly sturdy, necessitating scarcer repairs or substitutions than asphalt roofs.
Concrete Tiles
For those that like the look of ceramic tiles, as well as their fire resistance, this may not be the choice, but those who want something a little tougher and less susceptible to cracking when having work done on the roof, there are the best tiles.
Bituminous Tiles
For those that want a lightweight, supple tile that’s easier to fit, there’s the bituminous tile. These types of tiles are made from cellulose fibre or using fibreglass allowing them to be flexible.
Polymer-Sand Tiles
A new-fangled substitute for ceramic tiles is the polymer-sand tile. Created from a combination of sand bound together with polymers, these are very rigid, sturdy tiles are shaped in a mould.
Copper Tile
Copper roofs can be a great choice for many due to their long lifespan. Copper tiles have the ability to last over a century before needing replacement.
Composite Tile
Another newer roofing tile is the composite. This is a multi-layered tile that is made using metal, acrylic and stone granules.
Stone Tiles
This is one of the oldest forms of roofing tiles that you can get out there. It is also one of the longest-lasting tiles on the market as well, with some roofs lasting well over 100 years.
A pitched roof is a type of roof that is defined to have a sloping surface that has an angle that is greater than 20 degrees. Pitched roofs offer a more classical appearance. They remain the most communal and effective answer in wet and cold weathers to guarantee all-out protection.
Eaves
In the roof, the lower part of the inclined roof which is prominent outside the external face of the wall. The chief purpose of eaves is to pour the rainwater from the roof straight on the exterior wall. It also provides protection from sunlight. Eaves are sometimes decorated to an architectural beauty.
Gable
The Three-sided higher part of the wall at the end of a ridge roof.
Flashing
A band of impermeable material, typically metal, used to eliminate water from the intersection between a roof covering and another part of the structure. Flashings are provided to stop moisture from inflowing the wall and roof through joints in copings, parapet wall, and other infiltrations through the roof plane.
Hip
The Hip is defined as the exterior angle, which is generally greater than 180 degrees, which is formed at the inclined ridge of the roof slopes.
Ridge
The ridge is defined as the horizontal intersection made by the rising roof surfaces that are inclined in opposite directions.
Purlins
Purlins are the horizontal members which are laid on the principal rafters which help to support the common rafter of a roof. This is usually done when the span is large. Purlins are made from wood or steel. The top surfaces of the purlins intend to be unvarying and plane.
Fascia
This is the wooden board that is fixed to the feet of the common rafter at eaves. The Fascia helps the lowest ends of the roof covering material to rest on it.
Rafter
One of the major structural components of a pitched roof is a rafter. The rafter generally begins for the support of the roof to the ridge or hip. The purlin is supported by equally spaced rafters used side by side.
A roof serves as something which is so much more than just a top of a building. A roof delivers guard from the elements and precipitation, it also helps drain water from a structure, and helps to provide insulation to the structure allowing it to keep the interior of a building cool or warm, according to season.
There are several steps to building a roof
Mount the trusses.
This step requires the building’s wall frames to be completely level, square and plumb. If you are building the roof onto a building that is still a frame you must use ladders or scaffolding. Hoist the trusses onto the roof.
Install temporary braces.
You will need to install temporary braces that the trusses can rest on until the sheathing and permanent bracing are installed, this has to be done before you install the trusses. At the centre of the back wall, nail the bottom half of one two-by-six board that's 16 feet long to the top of the outside wall, making sure you fasten it to a stud.
Install the end trusses.
Install the two end trusses at the front and back of the building, making sure you affix them to the temporary bracing. The batten you take will have to be a bit longer than the distance will separate the trusses.
Install the standard trusses.
According to the instructions provided by the manufacturer, you will first need to install the first standard truss. You will also need to nail it to the batten from the first truss.
Sheath the roof.
Once your trusses permanently braced, you can begin with the sheathing of the roof. Starting from the bottom corner and moving across the bottom, the sheathing is installed lengthwise.
Install the roof cover.
Like the sheathing and underlayment procedures, the roof cover is installed lengthwise from the bottom up. The shingles should be staggered, and they should also overlap at the same time. You will need to work up to the ridge and use a ridge cap shingles to finish the ridge.
We can help you get more tile or slate roofing work with our qualified job leads and boost your business.
Join today