Skip Hire in Waterlooville

This is a question that’s very common amongst individuals looking for the best way to get rid of glass and reasonably so. Glass is a very dangerous and hazardous item which requires sensible precautionary measures to your waste disposal activities. If you are looking to dispose a whole glass, you should first consider giving it away to a friend or family who might be able to put it to good use. However if you are still concerned whether you can put glass in a skip, the answer is yes. And in fact, it’s probably the best glass disposal option that’s currently available, as it goes a long way to ensure user’s safety in the broken glassware pieces handling process.

Upon successful completion of your building’s construction or renovation, there’s a high chance a lot of broken glasses would be scattered everywhere and in need of immediate disposal efforts. The longer you ignore the glasses lying around, the higher the possibility of the glasses harming you or the construction workers. As a result, it is vital to make sure that the construction or project site is clean and free of any glass-posed hazards. Hiring a skip is your best bet to get rid of these harmful and unwanted wastes from your environment.

Wheelies are often considered to remove glasses especially from construction sites. However, due to the bulkiness and sharpness of glasses, it is crucial to incorporate heavy disposal equipment that are good enough to cut through the rubbish on the site. In addition, it’s not advisable to dump your broken glass in recycling bins, as it poses great threat to the waste disposal team collecting the recyclables. If you’d ever need to put your glass in a skip, ensure to insert them in boxes or wrap them up with paper before removal to enhance user’s protection. Click here to learn more about skips.

This is definitely one of the questions that first comes to mind when considering to acquire a skip for either residential or commercial waste disposal purposes. The cost of a skip is dependent on so many factors but the most significant determinants would be the volume of the waste and type/size of the skip you require.

Once you are able to identify the most suitable skip size for the volume of waste or rubbish for disposal at your premises, estimating the cost would be a lot easier. Here, we’ll give you an insight into skip sizes and the amount of waste each skip type can hold at a go.

Skip Types

• Mini Skip

This is also referred to as a 4 yard skip which is the smallest and has the capacity to hold within a range of 40 and 45 average sized waste bags. It normally costs between £90 to £130 for a week’s hire.

• Medium Skip

The 8 yard skip is the most common and has the capacity to hold within a range of 80 to 90 average sized waste bags. It normally costs between £200 to £250 for a week’s hire.

• Large Skip

The 12 yard skip is the largest and has the capacity to hold within a range of 125 to 135 average sized waste bags. It normally costs between £250 to £340 for a week’s hire outside London. However, it can be a little bit more expensive in the capital - about £350 to £390 for the same amount of time.

It must, however, be taken into account that the cost of a skip also depends on other factors such as your location, the skip hire company, the volume of waste and lots more. Click here to learn more about skip prices.

Apart from the cost of hiring a skip, the area in which to place the large item is another major concern for individuals looking to hire a skip. So if you’re wondering whether you can place your hired skip on the road, there are four legal requirements that applies and must be complied with for your protection in the situation whereby a third party accident takes place. Deciding to overlook these conditions can lead to a fine or forceful removal of the skip by the local council.

Here are the compulsory legal requirements that must be fully complied with:

• Get A Permit

The local council gives out a permit for skips to be placed on the road. This permit must be acquired and the cost may vary depending on the local council in your area.

• Illuminate The Skip

Since the skip is to be placed on the road, then it’ll only make sense to have it illuminated at night or in low lighting situations for safety of all road users. According to the law, lights must be positioned at each end of the skip to be easily spotted.

• Use Cones

According to the law, a minimum of two (2) cones must be placed on the skip’s approach side for the protection of all road users.

• Comply With The Skip Requirements

You can’t place just any skip you like on the road. By the law, there are certain conditions that must be met by the skip itself before placement. It must be painted with the yellow colour on the sides, have both the owner’s name and phone number clearly written on it and must also possess a BS AU152:1970 complying red and yellow fluorescent reflective marking which is compulsory to be acquired within two (2) working days upon filling.

Click here to learn more about skips.

Generally, 4-yard skips are basically designed for small clean or clear out projects or residential use. If you want to carry out a small renovation task or to clear out your home, you simply can not ignore the disposal of your unwanted waste. You’ll save yourself some time, money and potential accidents by hiring a 4-yard skip that will do the job effectively. We are all aware how time consuming it is making several trips to the local waste disposal centre.

When talking about the size of a 4-yard skip, it runs beyond its capacity. Skips of small sizes can be easily accommodated in not too large spaces which can be in the garden or driveway which saves you the stress and money of having to acquire skip hire permits.

If you’d like to know the the size of a 4 yard skip in metres, we’ve got you fully covered for both imperial and metric! The answer is provided below:

Imperial - Width 4’3, Height 3’2

Metric - Width 1.29m, Height 0.972m

It is, however, important to take note that when hiring a skip the measurement might be a bit tricky. The ‘4 yard’ term implies the capacity of the skip and not the length. The actual length of a 4 yard skip is only 6 feet or 2 yards. As a result, before you hire a skip, there’s the need to be clear as to the measurement you’re looking for. Otherwise, you might end up hiring the wrong skip and having to get another. Not good for your pocket, right? Well, that’s why we’ve provided this answer to help you in the best possible way! Click here to learn more about skips.