Solid Fuel Boiler in Staffordshire

When winter approaches, the temperature drop is usually a concern for several homeowners, after all having to heat your house regularly can only imply energy bills to settle. So whether you’re looking to upgrade your central heating system or perhaps your boiler is completely broken, the price as well as efficiency are crucial factors you must put into consideration before making an investment decision. In this article, we’re going to look at the most affordable heating system option between solid fuel and gas. Let’s take a look!

Heating your hot water system via a water back boiler in your stove only demands just a fraction of the price when compared to the highly expensive liquefied gas alternatives. Although the price of coal as well as other solid fuel has also been on a gradual increase in the past couple of years, the fact remains that this increase is still nothing compared to the spike in gas prices. What’s more? Gas boilers, more often than not, comes with at a ridiculously high price which makes it a major turn off for many homeowners who are on a tight budget.

There are a plethora of affordable solid fuel sources, but it’ll be wise to check in with friends or neighbours who stays nearby before you you make an investment decision. This is mainly due to the fact that purchasing fuels in bulk can earn you a good discount as well as the peace of mind knowing that those living under your roof are warm and super convenient in the cold too. And not only are solid fuels more affordable than gas, but they’re also a lot cheaper than liquid fuels, which implies that you can afford to buy quality products to make sure your systems operate efficiently and smoothly.

If you’re looking to warm up your household to ensure your comfort all year long, there are actually a wide array of heating systems out there that you can put into consideration. However, in this article, we’ll be taking a look at gravity feed boiler and how it works.

A gravity fed heating system is basically an all water based hydronic heating ( both hot water and steam) that makes use of the natural gravity attributes of heated water as well as water vapour to distribute energy. Normally, this type of heating system possesses a cold water tank in the house’s loft or attic with a boiler on the ground floor as well as a hot water cylinder which is usually somewhere between these two components.

In the event whereby there’s a call for water, the boiler is going to fire up and warm a large volume of water. And due to the fact that cold water is a lot denser than the newly heated water, it’s able to drop down to the boiler. Subsequently, the heated water is transported up to the hot water cylinder from where it is forced out and distributed to the hot water taps. If there happens to be a heat request during this period, the heated water will be transported to the radiators with the help of a pump. As a result, when it comes to gravity heating system, it’s simply impossible to have heating in the absence of hot water. this is of course unless you’re making use of C Plan which features 1 zone valves alongside 6 wires. These kind of system are, however, usually operated by programmers that automatically switch hot water on any time there’s a heat request.

As an environmentally conscious homeowner, it’s very likely you would have heard of a wood pellet boiler or maybe even considering fitting one in your home or property. So if you’ve heard about wood pellet boilers, you’d probably want to know about it especially how it works. In this article, we’re going to walk you through the wood pellet boilers operating process. Let’s take a look!

✓ Typically, wood pellet boilers possess 4 major components, these includes a burner ( which ignites or burns the pellets), a hopper ( which stores unused pellets), a conveyor ( which works to carry the pellets from the hopper to the burner where its ignited) and lastly, a controller ( which responds automatically to your thermostat and appliances’ demands).

✓ In the event whereby your thermostat demands heat or if you happen to switch on a hot water tap or appliance, pellets will be automatically fed into the burner which in turn ignites it and set the firing rate to match the needed heating load.

✓ In a situation whereby more pellets is needed by your boiler, the vacuum or augur system will act by pulling pellets from your bulk pellet storage bin and automatically refill itself.

✓ The wood pellet boiler will clean the burn pot and heat exchanger areas ( moving ash into the ash bin), during and after the burn cycles. The ash bin will be emptied once for every 2 to 3 ton of pellet that’s ignited.

Other facts about wood pellet boilers

✓ The wood pellet boiler can be directly linked to existing plumbing and heating system, regardless of whether or not there’s an existing heating oil boiler remaining.

✓ Wood pellets can be stored in bulk in a storage bin outside your home as the bins are generally weather resistant and also very durable.

Due to the fact that wood pellet boilers are contingent on eco-friendliness and cost efficiency, they’re gradually growing in popularity amongst home or property owners. It offers a viable alternative to other types of boilers such as oil fired boilers, gas boilers or electric boilers partly due to government’s Renewable Heat Incentive scheme which makes it more affordable to operate when compared to traditional boiler systems. Although there are several kinds of boilers available in the market today, but as the name suggests,wood pellet boiler makes use of wood pellet as the heating source. So if you’re thinking about installing a wood pellet in your home or property, you’d probably be interested in knowing how much the home appliance would cost. In this article, we’ll give you a rough estimate of the cost to help you make informed decisions.

When purchasing a wood pellet boiler for your home, one of the first thing to consider apart from the cost is the is the storage space needed to keep the pellets, which is usually given in plastic sacks. However, if you don’t have the storage space, you’ll have to spend a certain amount of your budget so as to construct a storage room specifically for the boiler.

In general, a standard wood pellet boiler will cost within the range of £4000 to about £6000, although you’re most likely going to put the pellets into the boiler by yourself, which may actually prove to be inconvenient in the long run if you’re going to do it on a more frequent basis. However, there are more expensive versions which are able to feed themselves automatically. The cost of these versions are usually up to £10,000 upwards.