Under Floor Heating in Barnsley

The comfort provided from stepping onto a heated floor is simply unrivalled and even more so, during those cold mornings and chilly nights. With that in mind, stepping onto a soft rug is also a wonderful feeling. So is it possible to have heated floors under carpets? The short and simple answer to this question is yes, heated floors can be installed safely under carpet. If you have the appropriate information, a little bit of planning as well as the right tools and materials, there’s simply no limits as you can enjoy the best of both flooring worlds without any fear. Unlike many individuals would believe that carpet will trap heat rising from the floor, carpeting actually provides the same temperature of any heated floor. What’s more? With the appropriate underlay, the carpet can be provided with the right support which is going to double the comfort provided by the in floor heating system.

One major source of concern is the fact that when heat and textiles are placed close to each other, safety hazard and product performance becomes a huge concern. However, all in flooring heating products have been subject to numerous tests and put through intensive studies and have been largely incorporated by electricians for almost 5 decades. Nationwide standards ensure product safety via independent testing agencies and cables utilized for in flooring heating are designed in such a way to protect wires and get rid of any possibility of electric shock.

Further, with the help of a thermostat, users can adjust and monitor the temperature levels coming from their heat sources. And since there’s a restriction on the maximum temperature of in flooring heating system, home and property owners can be rest assured that their flooring heat will never rise up to a level considered to be unsafe.

One of the big benefits of electric boilers is that they do not require annual servicing. There is no legal requirement for a yearly service and safety inspection as there is with gas boilers. Some installation companies do offer servicing packages included as part of the price.

Since it’s very common to find heated floors in the bathroom, it becomes very understandable that most home and property owners are fitting a radiant floor heating system under tile flooring. If you’re thinking about how you can fit heat under tile floor, then you’ve come to the right place. However, if you lack enough confidence to pull this off, then we’d advise you get in touch with a professional who can guarantee the best results for help. In this guide, we’d be considering how heating products are fitted under the most commonly heated flooring material which is tile. Let’s take a look!

1. Take a measurement of the room you wish to heat. When taking this measurement, you should leave out permanent fixtures such as tubs, toilets, floor vents and more. This information will be used to create a project sketch which includes the room dimensions
2. Test your electric floor heating rolls. To make sure that your floor heating rolls are in perfect working condition, you should use a digital ohmmeter to test it.
3. Inspect the subfloor. Clear the surface of any nails or other sharp objects which could cause damage to the heating element.
4. Install the flex roll. Simply roll out your flex roll till it gets to the opposite side of the room. Once done, you can then cut the mesh and turn 180 degrees to continue fitting in the other direction.
5. Place the sensor. If you happen to possess a floor heating thermostat that enables a floor sensor, ensure to position the sensor near the thermostat’s location and exactly between two cables, then use hot glue or weave into mesh to secure it.
6. Connect the thermostat. We’d advise you get in touch with a professional to have this done.
7. Install the tile.

The floor heating system possesses a flat ribbon located underneath which be installed directly underneath wooden floors without the need for any additional subfloor preparation. It happens to be one of the few systems that can function as a primary heat without the need for screeds. If you’re interested in learning how to fit underfloor heating under wooden floor, then you’ve come to the right place! In this step by step guide, we’re going to take you through the process and providing you with all the necessary details at each step of the way. Let’s take a look!

To get started, you’ll only require a little preparation and this involves making sure that the surface area is dust and debris free. Once done, you’re ready to go.

1. Spread your 6mm therm-all insulation and make sure it covers the entire floor.
2. Put the ribbon underfloor heating mats on the insulation
3. Use the double sided tape on the under floor heating mats to attach them to the insulation
4. Make use of high adhesive take where needed to make sure the heating mats are secured.
5. Route the cold leads ( live and neutral ) to a junction box right above the skirting board level.
6. Examine whether or not the resistance level of the heating elements matches with the resistance chart in the installation manual
7. Link the cold leads with a 5 lever quick connectors
8. Install the wooden floor directly over the top of the heating mats
9. Due to the dangers involved while working with electricity, it’s advisable to call in a reliable and professional electrician to help with the setting up of the electrics.