Windows | uPVC | Single Window
Shetland - ZE3
Enquiry from: Gordon L
Start Date: Immediate
Are you the property owner: Owner of the property Other Forms: None Please call to appoint
When replacing your house's windows you do not always have to complete the entire home. On occasions you may just require to have a single window changed, maybe due to a broken pane or for updating to double glazing.
It's common for many people to replace simply one double glazed window. One factor that individuals wish to replace one window is that the closed device inside has actually stopped working. You'll understand if this has taken place since you'll have the ability to see condensation on the inside of glass, which gets discouraging because you can not clean it away. In this situation, you can select to simply change the covered device or the entire frame, which you could wish to do if it's looking past its finest.
When you're changing just one double glazed window, if you know the brand name of your current windows you could ask your installer if they can source the same ones. This will assist to keep them looking as similar as possible, although if your existing windows are very old you may see some discolouration on the exterior compared to the new one, and also locks and trickle vents might look various.
Changing simply one double glazed window should not take a certified window fitter long, and can set you back as little as ₤ 300. It's worth remembering that all substitute windows need to be certified that they've been installed to satisfy building regulations, so you'll need to relate to your local building control policeman that will certainly come and evaluate the work then release a certification. If you ask an installer that is signed up with a self-certification scheme (like FENSA, CERTAS) to fit the window for you, they can release the certification themselves when they have actually completed the work.
We will offer approximately 4 Window Installer pros locally, who will certainly use quotations for the work you desire done. You'll receive a property visit from professionals in Shetland Islands that'll aid you to choose the appropriate uPVC Single Window for your residence prior to carrying out the installment. Enter your postcode to start browsing now.
The typical cost of uPVC single window is around £300. Costs fluctuate based on the materials and the organisation used. The upper price range can be as high as £400. The material costs are in most cases around £110
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£500
£375
£250
£125
£0
| Labour cost | £180 | |
| Material cost | £110 | |
| Waste removal | £10 |
Requests for quotations in Shetland Islands in May 2026
Requests for uPVC Single Window quotations in Shetland Islands in May 2026. 0% change from April 2026.
Requests for uPVC Single Window quotations in Scotland in May 2026. 0% change from April 2026.
Shetland - ZE3
Enquiry from: Gordon L
Start Date: Immediate
Are you the property owner: Owner of the property Other Forms: None Please call to appoint
Shetland - ZE2
Enquiry from: Peter L
Start Date: Immediate
Three fixed up can windows 600 x 1000
Answer a few quick questions, so we can match you with local window installers who can help.
Get free, no-obligation local upvc single window quotes from 4 verified window installers working in Shetland Islands.
Compare customer reviews, services and prices, and choose the right tradesperson for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love Local Quotes it's a big part of my Business I would recommend to anyone
Most window installers will be able to provide you with one double glazed window and fit it for you. If you’re replacing one double glazed window in your home, ask them to try and source the same windows that you already have or find one that’s very similar. Externally, you probably won’t be able to notice the difference, but if your existing windows are very old there may be some exterior discolouration and the locks and handles might look slightly different.
If you want one double glazed window so you can fit it yourself, there are lots of online companies that can supply you with one window. However, window fitting is a skilled trade and you might want to consider whether you have the right tools and experience to fit it yourself. Of course, you’ll save money on installation costs, but if something goes wrong, you might end up shelling out to get it fixed anyway.
The other thing to consider is that any replacement windows need to be certified that they meet Building Regulations. If you fit the double glazed window yourself, you’ll need to apply to your local council building control officer to get a certificate that confirms that you fitted the window within the regulations. You’ll have to pay a fee for this, and it will be even more expensive if Building Control say that the window hasn’t been fitted within the regulations and you have to start again.
The alternative is to ask a reputable window installer that is registered with a self-certification scheme, like FENSA, to install the window. That means that they can self-certify that the window meets building regulations once they’ve finished the installation.
Unfortunately, you can’t fix the glass on one side of a double glazed window. That’s because they’re sealed units – once one pane of glass is broken, that will break the seal and its thermal insulation properties will be lost.
The good news is that if your window frame is still looking great, there’s no need to replace that. You can simply replace the glass in the window, which will cost much less. You can look to spend around £250 on a sealed unit, whereas a whole replacement single window may cost up to £600.
When an installer comes to replace the glass in your double glazed window, they will survey the inside and outside of your home around the window, then move any furniture by the window so they’ve got access. They should then pop a dust sheet down to stop any debris from getting on your floor.
Then, the installer will carefully remove the beads from the frame. They will then lift the glass out of the frame and put it somewhere safe before cleaning out all of the dust and any debris that has found its way into the frame. Using spacers at the bottom of the frame, the installer will make sure that the sealed unit is square in the frame to get a good fit. Once they’re happy, they will replace the beading and make sure it looks perfect before cleaning up their tools.
You could have a go at replacing the glass on a double glazed window yourself, but it’s not recommended. Leave it to the professionals who will know exactly what to do and will be able to do it quickly and safely.
Double glazed windows are better than single glazed generally because they are more energy efficient. The clue’s in the name – double glazed windows have two panes of glass while single glazed windows only have one. In double glazed windows, there is a space between the two glass panes. This space is filled with inert gas or a tight vacuum, which helps to provide an extra level of insulation. That means that heat won’t escape your home easily, nor will it creep in, so you can keep your home at a more comfortable temperature.
The extra pane of glass also helps to increase your home’s security. Single glazing is pretty easy to smash through, whereas it will take much more effort to smash double glazing and will create more noise, so burglars might be put off.
Another reason why double glazed windows are better than single glazed ones is that they help to reduce noise. Of course, if you live by a busy road you’ll still hear some traffic noise, but it can be significantly reduced buy double glazing. In the same way that the inert gas in the middle of the two panes keeps heat in and the cold out, it also helps keep noise out.
With double glazing, you’ll also notice much less condensation. With single glazing, it’s common to see condensation on the inside of the windows, especially when the heating is on. This is because the outside of the window is cold, but the inside is warm. With double glazing, the insulation between the two panes stops there being such a difference in temperature between the inside and outside of the window.
Coloured double glazing windows are more expensive than white ones, in general. uPVC is the cheapest material to use for double glazing, and white is the standard colour. But there are endless possibilities in terms of colours you can have, and they do come at additional cost.
Some people choose to have coloured double glazing that matches or opposes the colour of the exterior of their house. Another popular option is a woodgrain effect, which from a distance looks just like more expensive timber windows. The best thing about a wood effect is that you can have the stylish look of wooden windows without the maintenance, and they should last longer.
While coloured double glazing is more expensive than white ones, it doesn’t have to break the bank. The best thing to do is get in touch with a range of window companies and ask them to come round to give you a quote. They should be able to offer you brochures or links to websites of different brands of windows that offer coloured frames. From there, you can decide on the installers you liked most and the brand you preferred.
It’s worth bearing in mind that it’s not always best to go with the cheapest coloured windows. While there lots of good, inexpensive options out there, sometimes very cheap windows won’t be good quality and may not last as long as other slightly more expensive brands. Speak to your installer about guarantees that may come with the windows and how long they would expect them to last before making your final decision.
We can help you get more upvc single window work with our qualified job leads and boost your business.
Join today