Artex removal in Kirkby-in-furness

Compare Artex Removal Prices in Kirkby-in-furness

Home > Plastering & Ceilings Projects > Artex Removal > Kirkby-in-furness

Artex removal in Kirkby-in-furness

Are you trying to find Artex Removal in ? Our network of installers are can aid with your project. All of our in are examined so you can see local customer reviews, when the business was established, rankings, approval and cost enabling you to make the ideal decision on who to hire. Allow us take the inconvenience out of finding as much as 4 pros for your Artex Removal job.

 

Artex just describes a surface area finish that's frequently integrated for interior decoration. Although it's normally found on ceilings but it can likewise be used on the wall surfaces as well. The surface layer makes it possible for the specialist plasterer or designer add both appearance along with patterns to it. Originally, the name "Artex" is the hallmark of a UK based firm called Artex Ltd. With time, the Artex name has actually been used to describe all textured finishings, although there are various other businesses that make and offer identical products.

 

Before getting rid of artex on your ceiling, it's always important to identify whether or not the surface layer product includes asbestos. In addition to this, you might also want to know just how much you're mosting likely to have the asbestos artex ceiling removed. If yes, then you've come to the appropriate location! In order to assist you make the most effective informed decision feasible, this article was contacted help provide you an idea of the price it's mosting likely to cost to eliminate asbestos artex ceiling.

 

We will offer as much as 4 Artex Removal pros locally, who will supply quotes for the work you desire done. You'll obtain a property visit from professionals in that'll aid you to choose the best Artex Removal for your home before performing the setup. Enter your postcode to begin looking now.

Average Artex Removal cost in Kirkby-in-furness

How much artexing removal might cost depends on how big the area is, how accessible it is and your location. Different plasterers charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artex removal in the UK is about £200.

Average price per Artex Removal job in 2026

Avg. price low

Avg. price low
£190

Avg. price

Avg. price
£200

Avg. price high

Avg. price high
£400

£500

£375

£250

£125

£0

Prices based on actual Artex Removal costs for Kirkby-in-furness, as reported by local LeadsDoWork members.

Artex Removal installation cost in Kirkby-in-furness 2026

Labour cost £140
Material cost £50
Waste removal £10
Time frame: 1-3 days
Advertisement

Artex Removal on Google in Kirkby-in-furness

Google searches that showed Local Quotes, 21 August to 18 November 2026

683

Searches that showed one of our pages for Kirkby-in-furness, all services

Source: Google Search Console, the number of times our pages appeared in Google search results. It counts searches that showed the page, not quote requests.

Artex Removal searches near Kirkby-in-furness, 21 August to 18 November 2026

5

Searches that showed our page for Askam-in-furness

Kirkby-in-furness

Kirkby-in-Furness is a town in the Furness location of Cumbria, England. It has to do with 5 kilometres south of Broughton in Furness and 8 kilometres northwest of Ulverston. It is among the biggest towns on the peninsula's north-western shore, looking out over the Duddon estuary as well as the hills of the Lake District. Kirkby is a cluster of 6 different districts, namely: Soutergate, Wall End, Beck Side, Sand Side, Marshside and also Chapels. The name Kirkby was made use of by the Furness Railway business during the building and construction of its Cumbrian Coast Line, and was the name they offered to the station which serves these districts. The name Kirkby is much older. The church of Kirkby Ireleth, a name of Norse origin, is noted in the Domesday Book as one of the areas forming the Manor of Hougun which was held by Tostig Godwinson, Earl of Northumbria. Much of the real estate and also framework in Kirkby emerged as a result of the growth and also development of the Burlington Slate Quarries, which are owned by the Cavendish family members of Holker Hall and also Chatsworth House in Derbyshire. Residences at Marshside as well as Incline Foot were originally built for quarry workers, and the railway linked to the quarries adhering to bogie lines. Present-day Kirkby-in-Furness is now largely a commuter town but still offers a labor force for the slate and also agricultural job. The neighboring Kirkby Moor rises to 334 m (1098 feet) over sea level which features a 12 generator wind farm. The town has a progressively aged population because of the increase in residence rates and absence of homes ideal for very first time purchasers. This has caused young families leaving Kirkby, purchasing cheaper residences in bordering communities as well as towns. Consequently, the intake for the regional primary school has dropped substantially in the last couple of years, and also continues to fall.

Looking for Artex Removal in Kirkby-in-furness?

Get free quotes from local plasterers

Get free quotes

Artex Removal pros in Kirkby-in-furness

AJM PRO Plastering Services

1 review(s)
Based: in Preston, PR2 6JQ

Latest review

Shirley M., BL4
3

Plastering in Bolton

The company were messy when he said he was clean the protection was not put on th floor until I asked and he took 2 of m...

Similar Customer Enquiries for Artex Removal in and around Kirkby-in-furness

29 Mar

Artex Removal

Ulverston - LA12

Enquiry from: ALASDAIR G

Start Date: Immediate

Remove broken peeling paint, fill holes in plaster and replaster or skim wall. assess quality of the rest of the walls in a 4.4m x 3.4m room

Property: semi detached

Post a similar request >

Advertisement

Local & reliable plasterers near me

Tell us about your artex removal project

Answer a few quick questions, so we can match you with local plasterers who can help.

Find up to 4 plasterers in Kirkby-in-furness

Get free, no-obligation local artex removal quotes from 4 verified plasterers working in Kirkby-in-furness.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

It's always difficult finding a tra ...

It's always difficult finding a tradesman that comes recommended so having a recommendation service solves this problem

good service

good service

this is the first time I have used ...

this is the first time I have used this service and found it easy and cost effective

FAQs

how to get artex off a ceiling?

Artex is a water based surface coating which is used to decorate both ceilings and walls with a textured finish. Back in the 1970’s, artex happens to be very popular when the swirling or spiky effects it creates  were considered to be the best of fashion when it comes to interior designs. However, in today’s world, an artex ceiling is not only considered outdated but also a pain to clean and repair.

 

If you have an artex ceiling in your residential property and looking for a way to get it off, then you’ve come to the right place. In this post, we’re going to show you how its done without much stress.

 

To get started you’d need to get the following tools and material which includes: safety goggles, dust mask and rubber gloves, plastic sheeting, canvas drop cloth ( carpet) or rosin paper (hard floor) and step ladder

 

 

Prepare the room. Start this by moving all furniture out of the room or stack the furniture at the centre of the room and cover using plastic sheets. Once done, cover all non-removable items with plastic sheets and lay down a canvas drop cloth for carpet floors and rosin paper for hard floors

  • Put on your safety gear
  • Use a utility knife or joint knife to slowly chip away at the texture and create a smooth surface.
  • Mix joint compound in a bucket as per the instructions on the package
  • Skim the surface with a thin layer of joint compound to smooth it out using a taping knife, then leave to dry overnight before you proceed
  • Lightly sand the surface smooth with the help of a 220-grit sanding block
  • Use a damp cloth to wipe the surface clean prior to painting.
can you wallpaper over artex?

Although they’re pretty much outdated now, artex happens to be a very popular surface coating option just a few decades ago. Several homeowners with artex in recent times would either want to have them removed or cover them up with stuffs such as a wallpaper. So if you’re wondering whether or not it’s possible to wallpaper over artex, then there you have it. It’s possible to wallpaper over artex, however it’s not advisable as wallpaper may eventually crack over time. On the other hand, the artex can also create ridges beneath the wallpaper which allows unpleasant protrusions in the wallpaper. Instead of applying wallpaper over artex, a more permanent solution would be to cover it with drywall or wet plaster or perhaps just have it removed completely.

 

There are two types of wallpaper, there’s the thin wallpaper application which comes with adhesive on one side as well as a pattern or colour on the other side. With this, all you need do is simply to peel and stick. Then the other type is the sturdier wallpaper that’s more thick and requires a special wallpaper paste. However, it’s important to note that if you choose to wallpaper over your artex, you won’t be able to make use of the thin type of wallpaper, rather you’ll have to incorporate the sturdier  option which makes use of wallpaper paste.

 

The wallpaper paste is the product you mix with water to produce a paste which you’ll have to apply to your walls before applying the applying the regular wallpaper - one without adhesive on one side. Appling wallpaper to an artex decoration may just give you the updated appearance you so much desire.

does artex contain asbestos?

The fact is several buildings contain artex as well as other textured coating on walls and ceilings which are all likely to contain asbestos. However, artex itself is not the main threat here but the potentially deadly harmful fibres that’s contained in it. In this post, we’re going to look at whether or not artex truly contains the deadly abestos.

 

The short and simply answer to this question is yes, artex can definitely contain asbestos, however not all artex will contain asbestos. The main reason asbestos was a popular construction material is because it was not only cheap and strong but also because it was very durable and long lasting. It was used in numerous construction materials ( which includes artex ) before it was finally banned in the year 1999. unfortunately during the time when artex was very popular in the 60’s, 70’s as well as 80’s, asbestos was still very much in use during the period. And as a result, a lot of the artex incorporated during that period will contain the deadly asbestos fibres. However, this does not only apply to artex, but also other textured coatings containing asbestos were incorporated in construction until 1999 when asbestos was formerly banned in the UK. These asbestos containing materials are often used on walls as well as ceilings of residential properties.

 

Unfortunately, it’s not possible to know an asbestos containing artex just by looking at it. In order to determine whether or not an artex contains the deadly asbestos fibres, it’ll have to be sampled and tested in a laboratory. What’s more? While several artex contains asbestos, asbestos free artex was available from the 1970s. However, since it’s impossible to determine using the naked eye, all artex installed before the ban will be assumed to contain asbestos.

is artex dangerous?

The short and simple answer to this question is, it depends. Artex surface coating was manufactured with white abestos ( until the mid 1980’s ) in order to strengthen as well as harden it. In other words, this implies that all the ceilings and walls coverings made by Artex Ltd and other manufactures at the time are highly likely to contain asbestos. Although Artex Ltd stopped using asbestos as early as the mid 1980’s, there were still other manufacturers who continued using it until 1999 when the laws and regulations covering the use of asbestos changed in the year 2000.

 

Asbestos, however, is only harmful when disturbed and releases its deadly fibres. For instance, when it’s being sanded and removed as it usually poses no risks when left undisturbed. Since it’s not possible to identify Artex containing asbestos fibres with the naked eye, it’s strongly recommended that you hire the services of a qualified person or company to help determine if you have asbestos in your ceilings or walls especially if your house was constructed before the year 2000. The professionals will be able to advise you on the best course of action as well as if it’s dangerous.

 

To be sure if your Artex contains asbestos, you’ll need to have the artex sampled by an asbestos surveyor. If you’re planning to have a construction or maintenance work done on your property, and the artex is likely to be in the way or disturbed, there’s a need for you to have a refurbishment or demolition asbestos survey done. This will ensure that all the areas that’ll be disturbed by the work is properly tested to determine the presence or otherwise of asbestos. If found, the artex will have to be addressed and either removed or protected before any work can take place.

 

Artex Removal

Other Top Projects in Kirkby-in-furness

Are you a plasterer in Kirkby-in-furness?

We can help you get more artex removal work with our qualified job leads and boost your business.

Join today