Bifold Doors in Kidderminster

How To Install Bifold Doors

If you’re looking to install a bifold door in your home or property, then you’re at the right place! In reality some jobs are better left to the professionals and one of such jobs is bifold door installation especially if you lack proper training and experience that’ll guarantee the best result the first time. If otherwise, hiring a professional installer will do you lots of good like saving you time and extra money that could result from costly errors. In this step by step guide, we’ll take you through the bifold doors installation process.

The first step to take when it comes to bifold door installation is to take the measurement of the door opening and get a kit in the appropriate size. For a better accuracy, do note that the combined measurement of both doors should be about an inch less than the opening’s total width while also being two inches less than the door frame’s height.

• Install the top rails in such a way that the rail’s end makes contact with the door frame’s side using the screws.

• Fit the bottom rail in the same fashion as the top ensuring the rail’s end makes contact with the same side of the door frame.

• Insert dowels into the predrilled holes in the door panels’ top.

• Place the dowel with the adjustment screw near the bottom’s side wall. While placing the fixed dowels in the door panel’s top and bottom on the side farthest away from the hinge. Once done, put the dowel and spring assembly into the door panel’s top, closest to the side wall.

• Fit the door panels into rail’s top and bottom while also adjusting the screws to centre the doors.

• Ensure the doors open and close like they should. If positive, tighten all hardware and fit the pulls or knobs of the door.

Bifold doors can be made to measure to suit a huge range of properties. There are minimum and maximum sizes for door leaves. These dimensions vary between manufacturers. Different configurations of bifold door are suitable for different size openings.

What Is The Smallest Opening For Bifold Doors?

Generally, bifold doors comes in a wide range of sizes and configurations. So if you’re looking to install them in your home, the opening size required will depend on multiple influencing factors. However, the question we’re going to look at here is the smallest opening for bifold doors.

First and foremost, let’s consider the size of bifold doors as learning about how big or small bifold doors can play a key role in helping you determine the size of bifold door you’ll need. Generally, the size of bifold doors will vary largely depending on the manufacturer, but they are usually within the range of 6.8 feet and 7 feet in height. The width, however, will be determined by the number of door panels you’d like to use but several configurations are designed in such a way that they can be installed in openings of about 1.8m and above. For each door panel, the size are usually between 500 and 1000mm in width. As a result, if you decide to opt for door panels with a width of 700mm, you’ll need to get about 3 of the door panels in order to install in an aperture that’s wider than 1.8m. What’s more? Door panels can also be custom made especially if the size you need isn’t available.

So with that in mind, what’s the smallest opening for bifold doors? The bifold door’s minimum width is 1400mm. And in order to install a bifold door to fill this size, you’ll require two individual door panels that’s 700mm in width. Building them any smaller than the minimum width will be unwise as this will make them bind when closing.

How Long Do Bifold Doors Last?

Are you ready to make the bifold doors investment decision? There’s one thing that might you may be hesitant about - how long do bifold doors last? Well, if this is the case then you’re not alone as this happens to be one of the most frequently asked question on bifold doors by potential investors. However the lifespan of bifold doors is based on a number of influencing factors such as the manufacturer of the door, the materials used in making the bifold door as well as how properly maintained it is.

There are several types of materials which can be used in making bifold doors. These includes aluminium, uPVC as well as wood. Amongst all the options, aluminium happens to be an incredibly robust material and when produced, it can have a lifespan of about 30 to 50 years on a property with good maintenance. Aluminium boasts a perfect blend of strength and malleability which happens to be a lot less likely to warp, expand or rot when compared to wood ( timber) or uPVC bifold doors. As a result, the life expectancy an aluminium bifold doors is expected to have is up to 45 years which is considerably larger than that of the uPVC at 25 to 35 years. What’s more? Aluminium framing is designed to last a long period while also being largely resistant to corrosion because aluminium does not rust as a result of the oxide layer on its surface. The function of the oxide layer is to protect the underlying metal while also being resistant to corrosion. As a result, the aluminium door is adequately protected from rain as well as acidity which are especially more present in the coaster regions.

It must be noted that the bifold doors only require minimal maintenance, however this is quite significant in ensuring the door lasts long.