Bifold Doors in Lisburn

Do Bifold Doors Fold Back Flat?

Bifold doors, also referred to as folding doors, have grown to become a great alternative to the conventional sliding doors. It has become a necessity rather than a luxury for most home and property owners especially in the south east who are in need of more space and a memorable focal point. However, before installing the impressive bifold doors in your home’s doorways, it’s always a wise decision to learn more about bifold doors. In this article, we’ll let you whether or not bifold doors fold back flat.

Generally, bifold doors consists of 3 to 8 door panels, bifold slides and fold back against one another in such a way that they sit flat against one or both walls. However, this depends on how they’re designed, whether they’ve been designed to open either from the side or from the middle. They basically work on what’s popularly referred to as a concertina principle. This style fold principle works in a way that allows the door panels to smoothly fold back flat which totally opens up the room into an open plan masterpiece.

So now that you know that bifold doors fold back flat, you may also be curious to know whether they also open in or out. Depending on your specific requirements, bifold doors can actually open inwards and outwards independently. However, due to the fact that opening bifold doors can take up some essential space, several home and property owners do prefer installing their bifold doors in such a way that allows it to be opened outwards. What’s more? It’s also essential to take into account that opening bifold doors inwards have the potential to drip water onto internal flooring especially for the wet regions.

How To Install Bifold Doors

If you’re looking to install a bifold door in your home or property, then you’re at the right place! In reality some jobs are better left to the professionals and one of such jobs is bifold door installation especially if you lack proper training and experience that’ll guarantee the best result the first time. If otherwise, hiring a professional installer will do you lots of good like saving you time and extra money that could result from costly errors. In this step by step guide, we’ll take you through the bifold doors installation process.

The first step to take when it comes to bifold door installation is to take the measurement of the door opening and get a kit in the appropriate size. For a better accuracy, do note that the combined measurement of both doors should be about an inch less than the opening’s total width while also being two inches less than the door frame’s height.

• Install the top rails in such a way that the rail’s end makes contact with the door frame’s side using the screws.

• Fit the bottom rail in the same fashion as the top ensuring the rail’s end makes contact with the same side of the door frame.

• Insert dowels into the predrilled holes in the door panels’ top.

• Place the dowel with the adjustment screw near the bottom’s side wall. While placing the fixed dowels in the door panel’s top and bottom on the side farthest away from the hinge. Once done, put the dowel and spring assembly into the door panel’s top, closest to the side wall.

• Fit the door panels into rail’s top and bottom while also adjusting the screws to centre the doors.

• Ensure the doors open and close like they should. If positive, tighten all hardware and fit the pulls or knobs of the door.

What Is The Smallest Opening For Bifold Doors?

Generally, bifold doors comes in a wide range of sizes and configurations. So if you’re looking to install them in your home, the opening size required will depend on multiple influencing factors. However, the question we’re going to look at here is the smallest opening for bifold doors.

First and foremost, let’s consider the size of bifold doors as learning about how big or small bifold doors can play a key role in helping you determine the size of bifold door you’ll need. Generally, the size of bifold doors will vary largely depending on the manufacturer, but they are usually within the range of 6.8 feet and 7 feet in height. The width, however, will be determined by the number of door panels you’d like to use but several configurations are designed in such a way that they can be installed in openings of about 1.8m and above. For each door panel, the size are usually between 500 and 1000mm in width. As a result, if you decide to opt for door panels with a width of 700mm, you’ll need to get about 3 of the door panels in order to install in an aperture that’s wider than 1.8m. What’s more? Door panels can also be custom made especially if the size you need isn’t available.

So with that in mind, what’s the smallest opening for bifold doors? The bifold door’s minimum width is 1400mm. And in order to install a bifold door to fill this size, you’ll require two individual door panels that’s 700mm in width. Building them any smaller than the minimum width will be unwise as this will make them bind when closing.

Bifold doors are generally very low maintenance. They will only need infrequent cleaning and occasionally you may need to oil the track mechanism to ensure smooth opening. Speak to your installer and ask about general housekeeping and long lasting treatments.