Stud Wall/Plasterboarding in Ibstock

Discover Stud Wall/Plasterboarding Prices in Ibstock

Home > Plastering & Ceilings Projects > Plasterboard dry lining > Ibstock

Stud Wall/Plasterboarding in Ibstock

Internal or partition walls can be relocated or knocked down in your property, which can change the area layout and create a substantial open plan room design for a spacious living area or a kitchen diner. When relocating or knocking through interior walls, it's important to understand both the kind of internal wall that it is, and whether or not it's a load bearing wall. Internal walls may be brick or block partitions, timber stud partitions, or even prefabricated wall panels. There are no shortcuts when it comes to determining whether a wall is load bearing or not, it's always worth engaging the services of a structural engineer if you are uncertain or can't view original plans for your premises. Load bearing walls can be moved, but this will often be more expensive and involves installing additional load bearing solution, such as steel lintels. Moving or knocking through internal walls will often consist of demolition of the existing wall, rebuilding or repairing the new walls, replastering and moving electrics. It may also demand changes to the floor, as in some cases the floors between rooms will not be totally level, and knocking through interior walls can reveal this. Generally moving interior walls will not require planning permission, but you'll need to adhere to building regulations for insulation and sound proofing. Consulting a structural engineer will ensure that any internal wall changes that you plan on doing will keep your premises structurally sound.

Average Plasterboard dry lining cost in Ibstock

The average cost of Plasterboard dry lining is £850. Costs vary based upon the materials and the tradesman hired. The upper price range can be as high as £977.5. The material costs are in most cases around £212.5

Average price per Plasterboard dry lining job in 2026

Avg. price low

Avg. price low
£638

Avg. price

Avg. price
£850

Avg. price high

Avg. price high
£978

£1100

£825

£550

£275

£0

Prices based on actual Plasterboard dry lining costs for Ibstock, as reported by local LeadsDoWork members.

Plasterboard dry lining installation cost in Ibstock 2026

Labour cost £595
Material cost £213
Waste removal £43
Time frame: 1-2 days
Advertisement

Plasterboard dry lining on Google in Ibstock

Google searches that showed Local Quotes, 22 August to 19 November 2026

388

Searches that showed one of our pages for Ibstock, all services

Source: Google Search Console, the number of times our pages appeared in Google search results. It counts searches that showed the page, not quote requests.

Plasterboard dry lining searches near Ibstock, 22 August to 19 November 2026

63

Searches that showed our page for Lutterworth

16

Searches that showed our page for Leicester

3

Searches that showed our page for Coalville

Ibstock

Ibstock is a village and civil parish about 2.5 miles (4 kilometres) south of Coalville in North West Leicestershire, England. The population of the civil church was 5,760 at the 2001 census raising to 6,201 at the 2011 census. The village gets on the A447 road In between Coalville as well as Hinckley. The toponym Ibstock could be a by-product of Ibestoche indicating the grange or hamlet of Ibba, which is an Old English personal name likewise located in other toponyms. The 1801 Census gives a total population of 763, in 152 families, two-thirds engaged in farming, the remainder in trade and production. By 1811 the population had boosted to 836. Ibstock is a former coal mining area and additionally has historic as well as present manufacturing plants that generate tiles, blocks, boots and shoes, and also light engineering. In the 19th century a branch of the Ashby and also Nuneaton Joint Railway was developed via the location and Heather & Ibstock railway terminal was opened to serve the village. Passenger solutions finished in 1931, with the line with to Coalville East closing completely in 1964, before the magazine of the Reshaping of British Railways report. The station master's residence on Station Road survives.

Looking for Plasterboard dry lining in Ibstock?

Get free quotes from local builders

Get free quotes

Similar Customer Enquiries for Plasterboard dry lining in and around Ibstock

10 Jul

Plasterboard dry lining

Leicester - LE2

Enquiry from: Aaron T

Start Date: Immediate

8.5M stud wall needs building

Post a similar request >

Advertisement

Local & reliable builders near me

Tell us about your plasterboard dry lining project

Answer a few quick questions, so we can match you with local builders who can help.

Find up to 4 builders in Ibstock

Get free, no-obligation local plasterboard dry lining quotes from 4 verified builders working in Ibstock.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Easy to use, posted the job I neede ...

Easy to use, posted the job I needed and was contacted by two companies within a few hours. Quick speedy service and the work was completed within 24 hours of posting the job

Excellent support Very helpful and ...

Excellent support Very helpful and give support in making choices

Easy to use Have good company Easy ...

Easy to use Have good company Easy to use Don’t send junk e-mail

FAQs

How to plasterboard a wall?

How To Plasterboard A Wall

If you’re looking to plasterboard your wall, one of the essential things to have in mind is that the plasterboard must be hung horizontally and not vertically. Due to the way they’re manufactured, plasterboard sheets normally possess a “grain along the length. This implies that, it’s only when they’re firmly placed perpendicular against the wall that they’re able to achieve their maximum strength. Materials you’ll need to complete this task includes: Tape measure, stanley knife, pencil, spirit level, drill driver or screw gun, surform, drywall screws and handsaw. Now let’s have a look at the wall plasterboarding steps!

• To plasterboard a wall the first step to take is to place each board in such a way to make the edges the centre of the noggins and upright. Also, the the adjoining walls and door openings should fit closely to the edges.

• Work from the door opening to the ending wall. From the the stud’s edge to the noggin’s centre, use your tape measure to measure a cut board and as a rule to mark up.

• Place your spirit level on the marks and use the Stanley knife to run a line along the intended cut. Once done, turn the board on its edge and give a sharp push on the back to split.

• Cut the paper left with the knife after folding the split edge back on itself. This way, you should get a nice and clean edge.

• In its right position, place the board up against the studwork. Install the screws on the board’s edges where a noggin or upright can be seen.

• Mark lines down across the board at the stud’s centre.

• Cut the end boards to length.

• Install the remaining boards as mentioned above. While doing this, make sure the factory edges are together.

• Cut any board extending into an opening and finish the edges using a surform.

We’d recommend you hire the professional services of a plasterer for the best results especially if you lack the necessary training or experience. Plasterboarding a wall can be a tricky challenge and you’d save yourself some time, money and effort by getting it right on the first trial.

How much plasterboard do I need?

How Much Plasterboard Do I Need?

Although many people especially contractors have a tough time estimating the number of drywall or plasterboard needed to complete a project, it’s a rather simple task if all factors are taken into consideration. If you’re able to follow the same procedures taken by professionals to count dry wall sheets, you’ll be in the right direction. Let’s have a look at the procedures to follow!

lTake Square Footage Measurement

• Measure the square footage of the area where the plasterboard will be fitted.

• Multiply the height by the width of each wall or ceiling area.

• Add all quantities to obtain a total square-foot amount.

lCalculate Drywall Sheets

• To calculate the number of drywall or plasterboard sheet is very simple once you’ve gotten the total square footage.

• To get started, simply divide the total square footage of area by 32 (that’s if you are using a 4 by 8 sheets) or you can also make use of 48 to make the division (only if you’re making use of the 4 by 12 sheets).

• The answer you get after the division will give you the full number of plasterboard sheets that’s required to complete the project.

We’d recommend you include an extra 10 to 15 percent of whatever you calculate to take care of the possible odd cuts and wastages. This implies that if your total area is 1600 square feet while incorporating 4 by 8 sheets, simply divide 1600 by 32 which equals 50 sheets, now take 10% of 50 which equals 5, then add back the 5 extra to the 50 sheets earlier calculated to get 55 sheets. If you wish to estimate the cost, simply multiply the number of sheets gotten by the price per sheet. Do not forget to include delivery charges and local taxes.

What is plasterboard?

What Is Plasterboard?

The plasterboard is unarguably one of the most common building materials across the globe. Sometimes referred to as gypsum board, gyprock, drywall or wall board, the plasterboard is mostly incorporated for ceiling cladding and interior walls in several homes and offices in recent times. However, despite its global acceptability, it’s a very misunderstood building material.

The plasterboard is manufactured using a gypsum core with a heavy paper covering both sides of the sheet. The measurement of a standard plasterboard sheet is a length of 2.4 metres in and a width of 1.2 metres, with a thickness of about 13mm. The board usually have either a bevelled or a bit flat edge. The bevelled edge makes it easy for the installers to use a plaster to smooth out the surface after nailing the sheets to walls and ceilings as well as taping the edges.

The plasterboard comes in different types. Although various manufacturers provide a unique name for their products, but they’re all included in one of the following categories:

• Water Resistant Plasterboard - This type of plasterboard are best suited to be used in water areas like bathroom, laundry rooms and kitchens.

• Acoustic Plasterboard - Due to its sounding proofing qualities, this type of plasterboard is preferred to be used in home theatres or noisy areas.

• Flexible Plasterboard - This is to be incorporated on curvy surfaces.

• Fire Resistant Plasterboard - Just like the name implies, this type of plasterboard is best suited for use in high fire hazard areas.

If you’re about to kick start some small renovations around your house or office, using a plasterboard to clad your walls is a very simple and worthwhile task. However, if you want to do major renovations or need to apply plasterboard to your ceiling, the best option would be to leave it to a seasoned professional.

How to put up plasterboard?

How To Put Up Plasterboard

Putting up a plasterboard is a vital process when it comes to home renovations. However as daunting as it may seem, with a good guide and regular practice you can master the skill within a small period of time. If you lack proper training and experience, we’d recommend you hire a seasoned professional plasterer for help so as to get the best result and also avoid additional costs due to possible damages.

Putting up plasterboard is way quicker than wet plastering and also significantly reduces the drying time that can slow down your renovation plans. With a plasterboard, you can delve straight into the decorating stage and achieve a smooth finish. Below are the steps required to put up a plasterboard.

• The first step is cutting the plasterboard to shape which be one of the most challenging parts of the process. This is because you’ll need to fit the board around things such as plug sockets and window sills. As a result, this involves cutting complex shapes rather than just a simple straight line. To get this done, simply mark out the cut required with the use of a tape measure, combination square and spirit level for a better precision. Once done, you can then use a plasterboard pad saw to cut along the marked spots.

• After you made the required cuts, the next step is putting up the plasterboard. And depending on where the boards are going to be put, this could be a very challenging task. If you’re going to put the boards on the ceiling or somewhere very high up, you’d probably need an extra pair of hands for help. To get this done, use the appropriate screws to secure the boards in place if you’re installing them directly on studs. However, if you’d be fixing them onto bricks or blocks, a drywall adhesive is your best bet.

Plasterboard dry lining

Other Top Projects in Ibstock

Are you a builder in Ibstock?

We can help you get more plasterboard dry lining work with our qualified job leads and boost your business.

Join today