Question 1

How long does it take to fix a roofing sheet on a commercial property?

Accepted Answer

How long it takes to fix a roofing sheet on a commercial property will depend on the size of your roof and how difficult access is. Corrugated iron roofing sheets are much easier to fit than other roofing materials such as clay tiles or EDPM rubber, so that will work in your favour.

The size of the team of the roofing company you engage will also make a difference. If they have a lot of tradespeople working on your roof with lots of experience, it will take less time, while if there are only a couple of people it will take longer.

Another thing to bear in mind when considering how long it will take to fix a roofing sheet is the weather. If it starts to rain, the contractors will probably have to stop and wait, as the roof will be too slippery to work on.

In general, it should take between 1 and 3 days to fit roofing sheets on a commercial property. If you’re not having a full roof replacement, it may only take one day, whereas a completely new metal roof could take up to 3 days.

Question 2

How much does it cost to replace a commercial roof?

Accepted Answer

How much it costs to replace a commercial roof depends on the type of roof you have and the size of your commercial property. Lots of commercial buildings have flat roofs, which are often made from felt, asphalt, EDPM rubber or fibreglass, while others are pitched roofs that might be made from tiles, shingle or metal. It’s likely that your commercial roof will need replacing if it’s more than 25 years old. A roofer can carry out an inspection to determine what, if any, work is needed, but there’s a high chance that you’ll need a roof replacement if it’s that old. If your flashing is looking worse for wear or you’re missing a number of tiles or shingles, it might be time to replace your commercial roof. So how much does it cost to replace a commercial roof? If your commercial roof is pitched, expect to spend between £4,500 and £7,500. It all depends on how large your property is and how easy access is, as the more scaffolding you need, the more it will cost. If your commercial property has a flat roof, the average cost would be approximately £4,500. Again, it all depends on the material, access and how large the roof is. Felt costs between £40-70 per square metre, while fibreglass costs between £80-110. Whatever type of commercial roof you have or what it’s made from, make sure you get a few quotes from reputable roofing companies so you know that the job will be done well.

Question 3

What is the best commercial roofing material?

Accepted Answer

The best commercial roofing material for your building will depend on the size and type of roof you have as well as your budget. A lot of commercial buildings have flat roofs, but some have pitched roofs. These days, flat roofs are almost flat, but are usually built on a small slope so water can drain effectively. Pitched roofs are much steeper and are made using tiles or shingle. Our top choices for commercial flat roofs would be fibreglass or EDPM rubber. Both of these materials will set you back around £80-110 per square metre, making them some of the most expensive flat roof materials, but they’re strong and durable. A fibreglass roof consists of a cut glass fibre mat that is pressed on the roofing frame, then resin is poured and rolled over the roof before a topcoat is applied. An EDPM roof involves laying an EDPM rubber membrane on the roof surface then gluing it down and coating it with a contact adhesive. For pitched commercial roofs, our top material would be concrete tiles or metal. Concrete tiles will set you back anywhere between 40p and £2.90 per tile and they’re long-lasting and fire-resistant. However, they are heavy and can be susceptible to high winds. Metal roofs have been used for over 50 years and today’s modern systems are extremely strong and allow for structural or thermal movement. Aluminium roofs will cost between £40-75 per square metre, plus installation. These days, flat roofs are almost flat, but are usually built on a small slope so water can drain effectively. Pitched roofs are much steeper and are made using tiles or shingle. Our top choices for commercial flat roofs would be fibreglass or EDPM rubber. Both of these materials will set you back around £80-110 per square metre, making them some of the most expensive flat roof materials, but they’re strong and durable. A fibreglass roof consists of a cut glass fibre mat that is pressed on the roofing frame, then resin is poured and rolled over the roof before a topcoat is applied. An EDPM roof involves laying an EDPM rubber membrane on the roof surface then gluing it down and coating it with a contact adhesive. For pitched commercial roofs, our top material would be concrete or clay tiles. Concrete tiles will set you back anywhere between 40p and £2.90 per tile and they’re long-lasting and fire-resistant. However, they are heavy and can be susceptible to high winds. Clay tiles cost as little as 50p to £2 each and can last over 50 years, but they are heavy so if your commercial roof isn’t already, it will need to be reinforced.

Question 4

Am I liable for a leaking roof in a commercial property?

Accepted Answer

Whether you’re liable for a leaking roof in a commercial property will depend on your ownership status and any contracts. Of course, if you own a standalone commercial property, it would make it your responsibility to repair to leaking roof. But if you own an office within a building, you should check your paperwork to see whether you are responsible for some or all of a leaking roof.

If you’re a tenant in a commercial property, things get a bit more complicated. Lots of commercial leases are FRI, or Full Repairing and Insuring leases, which means that the tenant is responsible for all external and internal maintenance and insuring the building. It means that it’s vital that you read through your tenancy agreement in full before signing it and seek legal advice if you think you need it. If your lease is an FRI lease, you are liable for a leaking roof in your commercial property.

It’s important to ensure that you have a schedule of condition for the property, which will mean that you only have to restore the commercial property back to the condition that it was in when you took over. It’s also worth getting the roof inspected before you sign the lease, as if there is any damage before you sign the landlord may be responsible.

The best way to avoid having to pay for a leaking roof in a commercial property is prevention. If you are liable for repairs and maintenance, make sure you have the roof inspected regularly by a reputable company to avoid having to pay for costly repairs when disaster strikes.

Avg. price low	Avg. price low £500
Avg. price	Avg. price £5,050
Avg. price high	Avg. price high £10,000

Commercial / Industrial Roofing in Brynteg

Obtain Commercial / Industrial Roofing Prices in Brynteg

Commercial / Industrial Roofing in Brynteg

Average Commercial roofing cost in Brynteg

Typical commercial roofing prices in the UK

Commercial roofing on Google in Brynteg

Google searches that showed Local Quotes, 17 July to 14 October 2026

103

Commercial roofing searches near Brynteg, 17 July to 14 October 2026

37

16

16

8

5

Commercial roofing near you

Looking for Commercial roofing in Brynteg?

Get free quotes from local roofers

Local & reliable roofers near me

Tell us about your commercial roofing project

Find up to 4 roofers in Brynteg

Hire with confidence

Our reviews

Average

Quick identification of interested ...

Helpful finding local trader to quo ...

very effecient

FAQs

Other Top Projects in Brynteg

Customer Reviews

Need more help?

Are you a roofer in Brynteg?