Commercial / Industrial Roofing in Emsworth

Compare Commercial / Industrial Roofing Prices in Emsworth

Home > Roofing Projects > Commercial roofing > Emsworth

Commercial / Industrial Roofing in Emsworth

Searching for commercial roofing in Emsworth? Our commercial roof covering experts in Emsworth will provide you with the ideal quotes for having commercial roofing installed or replaced.

Commercial rooftops can be required for various reasons, particularly if the existing roof is in need of repair or it'll be installed on a new build.

There are many factors that can contribute to the style and preparing of a new commercial roof and the price will all depend on the size and style you opt for.

Thermoplastic roofing is especially popular. This type of roofing is made from a sturdy material with high temperature tolerance. The material is a favourite for commercial roofing because it's resistant against ultra violet and chemical exposure. The roofing lasts for over 20 years, with a good resistance for fire, punctures and high wind loads.

You could also think about EPDM roofing. The sturdiness and versatility of EPDM roofing can make it a popular material in the commercial roofing world. These types of roofing materials have the benefit of being easier to install, maintain and repair too, adding to their popularity.

If you'd like to install commercial roofing then make sure to compare and contrast prices between vetted specialists in Emsworth. By doing this you can get the ideal price and offer available for you within Emsworth.

Average Commercial roofing cost in Emsworth

In Hampshire, a typical job costs about £6,450, with prices from around £430 for small jobs to £12,500 for bigger ones. Too few tradespeople covering Emsworth have set their prices yet, so these figures are for Hampshire.

Typical commercial roofing prices in Hampshire

Avg. price low

Avg. price low
£430

Avg. price

Avg. price
£6,450

Avg. price high

Avg. price high
£12,500

£13000

£9750

£6500

£3250

£0

Based on the price ranges set by 6 tradespeople who cover Hampshire (the middle values of their lowest and highest prices per job). Your price depends on the size of the job, access and materials.
Time frame: 1-2 weeks
Advertisement

Commercial roofing on Google in Emsworth

Google searches that showed Local Quotes, 18 July to 15 October 2026

1,976

Searches that showed one of our pages for Emsworth, all services

Source: Google Search Console, the number of times our pages appeared in Google search results. It counts searches that showed the page, not quote requests.

Emsworth

Emsworth is a modest town in Hampshire on the south coast of England, near the border of West Sussex. It lies at the north end of an arm of Chichester Harbour, a sizeable and shallow inlet from the English Channel. Adjacent to Emsworth is Thorney Island. The River Ems, which is named after the town and not, as is generally believed, the town being named after the river, passes into the Slipper millpond. The mill itself is now used as offices. According to the 2011 Census, the town has a permanent resident population of around 9492 people. Emsworth developed dramatically during the 20th century, reaching a population of about 5000 by the middle of the century after having around 2000 citizens in the 19th century. The 1000th house in Emsworth was developed in 1953. In the 1960s, substantial parts of the region were developed with a mix of bungalow and terraced housing. In 1906, construction began on the post office, with local cricketer George Wilder laying an inscribed brick. The renamed Emsworth Recreation Ground dates from 1909 and is the present home of Emsworth Cricket Club, which was established in 1811 and commemorated its Bicentennial in 2011. It was marked with a Grand Match versus the MCC. Cricket in Emsworth has actually been played at the same ground, Cold Harbour Lawn, ever since 1761. In the 19th century, the town had as many as 30 pubs and beer houses. The village has a basin for modest private yachts and fishing boats, which fills at high tide and can be drained through a sluice at low tide. For all your home makeovers, make sure to identify respected professionals in Emsworth to make certain of quality.

Looking for Commercial roofing in Emsworth?

Get free quotes from local roofers

Get free quotes

Recent commercial roofing enquiries in and around Emsworth

20 Nov

Commercial roofing

Rowland's Castle - PO9

Enquiry from: Homedry R

Start Date: Immediate

Commercial roofing Lead

At Homedry Roofing Havant, we are a team of dedicated professionals committed to providing exceptional roofing services to homeowners in the Havant area. With years of experience and a passion for qua

Post a similar request >

Advertisement

Local & reliable roofers near me

Tell us about your commercial roofing project

Answer a few quick questions, so we can match you with local roofers who can help.

Find up to 4 roofers in Emsworth

Get free, no-obligation local commercial roofing quotes from 4 verified roofers working in Emsworth.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Quick identification of interested ...

Quick identification of interested local tradesmen

Helpful finding local trader to quo ...

Helpful finding local trader to quote for my work

very effecient

very effecient

FAQs

What is the best commercial roofing material?
The best commercial roofing material for your building will depend on the size and type of roof you have as well as your budget. A lot of commercial buildings have flat roofs, but some have pitched roofs. These days, flat roofs are almost flat, but are usually built on a small slope so water can drain effectively. Pitched roofs are much steeper and are made using tiles or shingle. Our top choices for commercial flat roofs would be fibreglass or EDPM rubber. Both of these materials will set you back around £80-110 per square metre, making them some of the most expensive flat roof materials, but they’re strong and durable. A fibreglass roof consists of a cut glass fibre mat that is pressed on the roofing frame, then resin is poured and rolled over the roof before a topcoat is applied. An EDPM roof involves laying an EDPM rubber membrane on the roof surface then gluing it down and coating it with a contact adhesive. For pitched commercial roofs, our top material would be concrete tiles or metal. Concrete tiles will set you back anywhere between 40p and £2.90 per tile and they’re long-lasting and fire-resistant. However, they are heavy and can be susceptible to high winds. Metal roofs have been used for over 50 years and today’s modern systems are extremely strong and allow for structural or thermal movement. Aluminium roofs will cost between £40-75 per square metre, plus installation. These days, flat roofs are almost flat, but are usually built on a small slope so water can drain effectively. Pitched roofs are much steeper and are made using tiles or shingle. Our top choices for commercial flat roofs would be fibreglass or EDPM rubber. Both of these materials will set you back around £80-110 per square metre, making them some of the most expensive flat roof materials, but they’re strong and durable. A fibreglass roof consists of a cut glass fibre mat that is pressed on the roofing frame, then resin is poured and rolled over the roof before a topcoat is applied. An EDPM roof involves laying an EDPM rubber membrane on the roof surface then gluing it down and coating it with a contact adhesive. For pitched commercial roofs, our top material would be concrete or clay tiles. Concrete tiles will set you back anywhere between 40p and £2.90 per tile and they’re long-lasting and fire-resistant. However, they are heavy and can be susceptible to high winds. Clay tiles cost as little as 50p to £2 each and can last over 50 years, but they are heavy so if your commercial roof isn’t already, it will need to be reinforced.

How much does it cost to replace a commercial roof?
How much it costs to replace a commercial roof depends on the type of roof you have and the size of your commercial property. Lots of commercial buildings have flat roofs, which are often made from felt, asphalt, EDPM rubber or fibreglass, while others are pitched roofs that might be made from tiles, shingle or metal. It’s likely that your commercial roof will need replacing if it’s more than 25 years old. A roofer can carry out an inspection to determine what, if any, work is needed, but there’s a high chance that you’ll need a roof replacement if it’s that old. If your flashing is looking worse for wear or you’re missing a number of tiles or shingles, it might be time to replace your commercial roof. So how much does it cost to replace a commercial roof? If your commercial roof is pitched, expect to spend between £4,500 and £7,500. It all depends on how large your property is and how easy access is, as the more scaffolding you need, the more it will cost. If your commercial property has a flat roof, the average cost would be approximately £4,500. Again, it all depends on the material, access and how large the roof is. Felt costs between £40-70 per square metre, while fibreglass costs between £80-110. Whatever type of commercial roof you have or what it’s made from, make sure you get a few quotes from reputable roofing companies so you know that the job will be done well.

Am I liable for a leaking roof in a commercial property?

Whether you’re liable for a leaking roof in a commercial property will depend on your ownership status and any contracts. Of course, if you own a standalone commercial property, it would make it your responsibility to repair to leaking roof. But if you own an office within a building, you should check your paperwork to see whether you are responsible for some or all of a leaking roof.

If you’re a tenant in a commercial property, things get a bit more complicated. Lots of commercial leases are FRI, or Full Repairing and Insuring leases, which means that the tenant is responsible for all external and internal maintenance and insuring the building. It means that it’s vital that you read through your tenancy agreement in full before signing it and seek legal advice if you think you need it. If your lease is an FRI lease, you are liable for a leaking roof in your commercial property.

It’s important to ensure that you have a schedule of condition for the property, which will mean that you only have to restore the commercial property back to the condition that it was in when you took over. It’s also worth getting the roof inspected before you sign the lease, as if there is any damage before you sign the landlord may be responsible.

The best way to avoid having to pay for a leaking roof in a commercial property is prevention. If you are liable for repairs and maintenance, make sure you have the roof inspected regularly by a reputable company to avoid having to pay for costly repairs when disaster strikes.

How to install commercial rubber roofing?

How you install commercial rubber roofing is similar to fitting it on a residential property, except that the area that’s covered is likely to be bigger. With commercial properties, you should always leave any maintenance and repair works to the professionals – whether you own or lease the property, you could invalidate any insurance if you try to install rubber roofing yourself. We’ll outline the steps roofers will take when installing rubber roofing on a commercial property.

Firstly, the installers will remove any existing coverings and clean and dry the surface thoroughly. This is vital in ensuring that the rubber will stick. They will then unwrap the EDPM rubber membrane and leave it to rest until it’s fully expanded. On a warm day this may take around half an hour.

Next, the roofers will work with half a sheet of rubber at a time and adhere it to the roof surface. They may use a water-based adhesive which they will spread onto the roof in sections, then roll the membrane onto the surface before moving onto the next section. If they’re using a bonded adhesive, they will apply it to both the roof and the rubber and leave it to dry until it’s tacky before extending the membrane.

Once the EDPM rubber is rolled out, the installers will brush the surface with a large broom to get rid of bubbles and provide a stronger bond. Then they will work of the edges, applying adhesive to roof and walls edges, sealing corners and creating watertight seals. They’ll also tidy up any excess membrane and seal all the trims.

As long as it’s installed correctly, your commercial rubber roofing should last you decades without any repairs needed. It’s always best to inspect your roof regularly to spot any damage before it becomes a bigger problem.

Commercial roofing

Other Top Projects in Emsworth

Are you a roofer in Emsworth?

We can help you get more commercial roofing work with our qualified job leads and boost your business.

Join today