Commercial / Industrial Roofing in Telford

Get Commercial / Industrial Roofing Prices in Telford

Home > Roofing Projects > Commercial roofing > Telford

Commercial / Industrial Roofing in Telford

Looking for commercial roofing in Telford? Our commercial roof covering specialists in Telford will provide you the top quotations for getting commercial roofing installed or replaced.

Commercial roofs can be necessary for quite a few reasons, especially if the current roofing needs repair or it will be installed on a brand new build.

There are many factors that can play a role in the design and planning of a new commercial roof and the expense will all be determined by the size and style you choose.

Thermoplastic roofing is especially popular. This sort of roofing is made of a durable material with high temperature tolerance. The material is a favourite for commercial roofing as it's resistant against ultra-violet and chemical exposure. The roof structure lasts more than two decades, with a good resistance for fire, punctures and high wind loads.

You can also look at EPDM roofing. The durability and versatility of EPDM roofing tends to make it a popular material in the commercial roofing world. These kinds of roofing material have the benefit of being much easier to install, maintain and restore too, adding to their popularity.

If you would like install commercial roofing then make sure to assess prices between vetted experts in Telford. This way you will get the top cost and deal available for you in Telford.

Average Commercial roofing cost in Telford

In Western Midlands, a typical job costs about £3,150, with prices from around £1,200 for small jobs to £4,000 for bigger ones. Too few tradespeople covering Telford have set their prices yet, so these figures are for Western Midlands.

Typical commercial roofing prices in Western Midlands

Avg. price low

Avg. price low
£1,200

Avg. price

Avg. price
£3,150

Avg. price high

Avg. price high
£4,000

£4100

£3075

£2050

£1025

£0

Based on the price ranges set by 8 tradespeople who cover Western Midlands (the middle values of their lowest and highest prices per job). Your price depends on the size of the job, access and materials.
Time frame: 1-2 weeks
Advertisement

Commercial roofing on Google in Telford

Google searches that showed Local Quotes, 19 July to 16 October 2026

6,210

Searches that showed one of our pages for Telford, all services

Source: Google Search Console, the number of times our pages appeared in Google search results. It counts searches that showed the page, not quote requests.

Telford

The large town of Telford is located in Shropshire, with a populace of approximately 160,000. It's certainly the biggest town in the county and also one of the fastest growing towns in the UK. The region was only developed during the '60 and '70s as a brand new town on industrial and agricultural land. Make sure to make use of reliable tradesmen in Telford to keep your house up-to-date.

Looking for Commercial roofing in Telford?

Get free quotes from local roofers

Get free quotes

Recent commercial roofing enquiries in and around Telford

31 Dec

Commercial roofing

Market Drayton - TF9

Enquiry from: Kota K

Start Date: 1 to 3 months

Roof replacement costs price

Height: 2 storey · When: 1-3 months

Post a similar request >

30 Dec

Commercial roofing

Wolverhampton - WV8

Enquiry from: Thomas B

Start Date: Immediate

We currently have a flat rubber roof on a single story L shaped extension which wraps around the house, completed in 2018. Large roof antern 2.5 m x4m Total area is 100 square metres. The only existin

Post a similar request >

Advertisement

Local & reliable roofers near me

Tell us about your commercial roofing project

Answer a few quick questions, so we can match you with local roofers who can help.

Find up to 4 roofers in Telford

Get free, no-obligation local commercial roofing quotes from 4 verified roofers working in Telford.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Quick identification of interested ...

Quick identification of interested local tradesmen

Helpful finding local trader to quo ...

Helpful finding local trader to quote for my work

very effecient

very effecient

FAQs

How much does it cost to replace a commercial flat roof?
If your commercial flat roof needs replacing, how much it costs will depend on how big the roof is and what you want it to be made from. Lots of commercial flat roofs are made from felt or asphalt, but people are also beginning to turn to materials like EDPM rubber and fibreglass. Flat roofs can last a long time, but if it’s been 20 years or more since you had it replaced or inspected, it might be time for a new one. If a roofer inspects it and finds lifting, flashing problems, sagging or lots of blisters, it’s probably time to replace your flat commercial roof. So how much does it cost to replace your commercial flat roof? The average cost is around £4,500, but it could be much less or much more. It depends on how big your roof is and what material you choose. Felt is the cheapest material you can use for your commercial flat roof, at around £40-70 per metre squared, while a lead bay roof will cost the most at £90-110 per square metre. EDPM rubber and fibreglass roofs are being used more and more because they’re so durable, and they will cost between £80 and £110 per square metre. It might be worth spending a little more upfront to get a stronger and longer-lasting commercial flat roof.

What is the best commercial roofing material?
The best commercial roofing material for your building will depend on the size and type of roof you have as well as your budget. A lot of commercial buildings have flat roofs, but some have pitched roofs. These days, flat roofs are almost flat, but are usually built on a small slope so water can drain effectively. Pitched roofs are much steeper and are made using tiles or shingle. Our top choices for commercial flat roofs would be fibreglass or EDPM rubber. Both of these materials will set you back around £80-110 per square metre, making them some of the most expensive flat roof materials, but they’re strong and durable. A fibreglass roof consists of a cut glass fibre mat that is pressed on the roofing frame, then resin is poured and rolled over the roof before a topcoat is applied. An EDPM roof involves laying an EDPM rubber membrane on the roof surface then gluing it down and coating it with a contact adhesive. For pitched commercial roofs, our top material would be concrete tiles or metal. Concrete tiles will set you back anywhere between 40p and £2.90 per tile and they’re long-lasting and fire-resistant. However, they are heavy and can be susceptible to high winds. Metal roofs have been used for over 50 years and today’s modern systems are extremely strong and allow for structural or thermal movement. Aluminium roofs will cost between £40-75 per square metre, plus installation. These days, flat roofs are almost flat, but are usually built on a small slope so water can drain effectively. Pitched roofs are much steeper and are made using tiles or shingle. Our top choices for commercial flat roofs would be fibreglass or EDPM rubber. Both of these materials will set you back around £80-110 per square metre, making them some of the most expensive flat roof materials, but they’re strong and durable. A fibreglass roof consists of a cut glass fibre mat that is pressed on the roofing frame, then resin is poured and rolled over the roof before a topcoat is applied. An EDPM roof involves laying an EDPM rubber membrane on the roof surface then gluing it down and coating it with a contact adhesive. For pitched commercial roofs, our top material would be concrete or clay tiles. Concrete tiles will set you back anywhere between 40p and £2.90 per tile and they’re long-lasting and fire-resistant. However, they are heavy and can be susceptible to high winds. Clay tiles cost as little as 50p to £2 each and can last over 50 years, but they are heavy so if your commercial roof isn’t already, it will need to be reinforced.

Am I liable for a leaking roof in a commercial property?

Whether you’re liable for a leaking roof in a commercial property will depend on your ownership status and any contracts. Of course, if you own a standalone commercial property, it would make it your responsibility to repair to leaking roof. But if you own an office within a building, you should check your paperwork to see whether you are responsible for some or all of a leaking roof.

If you’re a tenant in a commercial property, things get a bit more complicated. Lots of commercial leases are FRI, or Full Repairing and Insuring leases, which means that the tenant is responsible for all external and internal maintenance and insuring the building. It means that it’s vital that you read through your tenancy agreement in full before signing it and seek legal advice if you think you need it. If your lease is an FRI lease, you are liable for a leaking roof in your commercial property.

It’s important to ensure that you have a schedule of condition for the property, which will mean that you only have to restore the commercial property back to the condition that it was in when you took over. It’s also worth getting the roof inspected before you sign the lease, as if there is any damage before you sign the landlord may be responsible.

The best way to avoid having to pay for a leaking roof in a commercial property is prevention. If you are liable for repairs and maintenance, make sure you have the roof inspected regularly by a reputable company to avoid having to pay for costly repairs when disaster strikes.

How long does it take to fix a roofing sheet on a commercial property?

How long it takes to fix a roofing sheet on a commercial property will depend on the size of your roof and how difficult access is. Corrugated iron roofing sheets are much easier to fit than other roofing materials such as clay tiles or EDPM rubber, so that will work in your favour.

The size of the team of the roofing company you engage will also make a difference. If they have a lot of tradespeople working on your roof with lots of experience, it will take less time, while if there are only a couple of people it will take longer.

Another thing to bear in mind when considering how long it will take to fix a roofing sheet is the weather. If it starts to rain, the contractors will probably have to stop and wait, as the roof will be too slippery to work on.

In general, it should take between 1 and 3 days to fit roofing sheets on a commercial property. If you’re not having a full roof replacement, it may only take one day, whereas a completely new metal roof could take up to 3 days.

Commercial roofing

Other Top Projects in Telford

Are you a roofer in Telford?

We can help you get more commercial roofing work with our qualified job leads and boost your business.

Join today