Commercial / Industrial Roofing in Tintagel

Obtain Commercial / Industrial Roofing Prices in Tintagel

Home > Roofing Projects > Commercial roofing > Tintagel

Commercial / Industrial Roofing in Tintagel

Looking for commercial roofing in Tintagel? Our commercial roofer specialists in Tintagel are going to offer the top quotes for having commercial roofing installed or replaced.

Commercial roofing could be needed for a variety of reasons, especially if the present roof needs repair or it will be attached to a new build.

There are several variables that will contribute to the structure and preparing of a new commercial roof and the expense will all depend on the size and style you choose.

Thermoplastic roofing is especially popular. This kind of roofing is made from a sturdy material with high temperature tolerance. The material is a favourite for commercial rooftops as it's resistant to ultra-violet and chemical exposure. The roof structure can last for over twenty years, with a fantastic resistance for fire, punctures and high wind loads.

You may also look at EPDM roofing. The sturdiness and versatility of EPDM roofing helps make it a popular material in the commercial roofing world. These types of roofing material have the benefit of being easier to install, sustain and repair too, leading to their popularity.

If you would like install commercial roofing then make sure to assess prices between vetted experts in Tintagel. By doing this you can get the very best price and offer available for you in Tintagel.

Average Commercial roofing cost in Tintagel

In the South West, a typical job costs about £5,250, with prices from around £1,000 for small jobs to £10,000 for bigger ones. Too few tradespeople covering Tintagel have set their prices yet, so these figures are for the South West.

Typical commercial roofing prices in the South West

Avg. price low

Avg. price low
£1,000

Avg. price

Avg. price
£5,250

Avg. price high

Avg. price high
£10,000

£10500

£7875

£5250

£2625

£0

Based on the price ranges set by 5 tradespeople who cover the South West (the middle values of their lowest and highest prices per job). Your price depends on the size of the job, access and materials.
Time frame: 1-2 weeks
Advertisement

Commercial roofing on Google in Tintagel

Google searches that showed Local Quotes, 18 July to 15 October 2026

210

Searches that showed one of our pages for Tintagel, all services

Source: Google Search Console, the number of times our pages appeared in Google search results. It counts searches that showed the page, not quote requests.

Commercial roofing searches near Tintagel, 18 July to 15 October 2026

16

Searches that showed our page for Liskeard

9

Searches that showed our page for Ivybridge

Tintagel

Tintagel is a civil parish as well as town situated on the Atlantic shore of Cornwall, England, United Kingdom. The population of the parish was 1,820 individuals (2001 census), and the location of the parish is 4,281 acres (17.32 km2). The parish population decreased to 1,727 at the 2011 census. A selecting ward additionally exists extending inland to Otterham. The population of this ward at the same census was 3,990. The village and also nearby Tintagel Castle are connected with the tales bordering King Arthur. The town has, in recent times, come to be appealing to day-trippers as well as tourists, and is one of the most-visited areas in Britain. Treknow is the biggest of the various other settlements in the parish, which likewise consist of Bossiney, Truas, Trebarwith, Tregatta, Trenale, Trethevy, Treven, Trevillet, and also Trewarmett.

Looking for Commercial roofing in Tintagel?

Get free quotes from local roofers

Get free quotes
Advertisement

Local & reliable roofers near me

Tell us about your commercial roofing project

Answer a few quick questions, so we can match you with local roofers who can help.

Find up to 4 roofers in Tintagel

Get free, no-obligation local commercial roofing quotes from 4 verified roofers working in Tintagel.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Quick identification of interested ...

Quick identification of interested local tradesmen

Helpful finding local trader to quo ...

Helpful finding local trader to quote for my work

very effecient

very effecient

FAQs

What is the best commercial roofing material?
The best commercial roofing material for your building will depend on the size and type of roof you have as well as your budget. A lot of commercial buildings have flat roofs, but some have pitched roofs. These days, flat roofs are almost flat, but are usually built on a small slope so water can drain effectively. Pitched roofs are much steeper and are made using tiles or shingle. Our top choices for commercial flat roofs would be fibreglass or EDPM rubber. Both of these materials will set you back around £80-110 per square metre, making them some of the most expensive flat roof materials, but they’re strong and durable. A fibreglass roof consists of a cut glass fibre mat that is pressed on the roofing frame, then resin is poured and rolled over the roof before a topcoat is applied. An EDPM roof involves laying an EDPM rubber membrane on the roof surface then gluing it down and coating it with a contact adhesive. For pitched commercial roofs, our top material would be concrete tiles or metal. Concrete tiles will set you back anywhere between 40p and £2.90 per tile and they’re long-lasting and fire-resistant. However, they are heavy and can be susceptible to high winds. Metal roofs have been used for over 50 years and today’s modern systems are extremely strong and allow for structural or thermal movement. Aluminium roofs will cost between £40-75 per square metre, plus installation. These days, flat roofs are almost flat, but are usually built on a small slope so water can drain effectively. Pitched roofs are much steeper and are made using tiles or shingle. Our top choices for commercial flat roofs would be fibreglass or EDPM rubber. Both of these materials will set you back around £80-110 per square metre, making them some of the most expensive flat roof materials, but they’re strong and durable. A fibreglass roof consists of a cut glass fibre mat that is pressed on the roofing frame, then resin is poured and rolled over the roof before a topcoat is applied. An EDPM roof involves laying an EDPM rubber membrane on the roof surface then gluing it down and coating it with a contact adhesive. For pitched commercial roofs, our top material would be concrete or clay tiles. Concrete tiles will set you back anywhere between 40p and £2.90 per tile and they’re long-lasting and fire-resistant. However, they are heavy and can be susceptible to high winds. Clay tiles cost as little as 50p to £2 each and can last over 50 years, but they are heavy so if your commercial roof isn’t already, it will need to be reinforced.

How long does it take to fix a roofing sheet on a commercial property?

How long it takes to fix a roofing sheet on a commercial property will depend on the size of your roof and how difficult access is. Corrugated iron roofing sheets are much easier to fit than other roofing materials such as clay tiles or EDPM rubber, so that will work in your favour.

The size of the team of the roofing company you engage will also make a difference. If they have a lot of tradespeople working on your roof with lots of experience, it will take less time, while if there are only a couple of people it will take longer.

Another thing to bear in mind when considering how long it will take to fix a roofing sheet is the weather. If it starts to rain, the contractors will probably have to stop and wait, as the roof will be too slippery to work on.

In general, it should take between 1 and 3 days to fit roofing sheets on a commercial property. If you’re not having a full roof replacement, it may only take one day, whereas a completely new metal roof could take up to 3 days.

How much does it cost to replace a commercial flat roof?
If your commercial flat roof needs replacing, how much it costs will depend on how big the roof is and what you want it to be made from. Lots of commercial flat roofs are made from felt or asphalt, but people are also beginning to turn to materials like EDPM rubber and fibreglass. Flat roofs can last a long time, but if it’s been 20 years or more since you had it replaced or inspected, it might be time for a new one. If a roofer inspects it and finds lifting, flashing problems, sagging or lots of blisters, it’s probably time to replace your flat commercial roof. So how much does it cost to replace your commercial flat roof? The average cost is around £4,500, but it could be much less or much more. It depends on how big your roof is and what material you choose. Felt is the cheapest material you can use for your commercial flat roof, at around £40-70 per metre squared, while a lead bay roof will cost the most at £90-110 per square metre. EDPM rubber and fibreglass roofs are being used more and more because they’re so durable, and they will cost between £80 and £110 per square metre. It might be worth spending a little more upfront to get a stronger and longer-lasting commercial flat roof.

Am I liable for a leaking roof in a commercial property?

Whether you’re liable for a leaking roof in a commercial property will depend on your ownership status and any contracts. Of course, if you own a standalone commercial property, it would make it your responsibility to repair to leaking roof. But if you own an office within a building, you should check your paperwork to see whether you are responsible for some or all of a leaking roof.

If you’re a tenant in a commercial property, things get a bit more complicated. Lots of commercial leases are FRI, or Full Repairing and Insuring leases, which means that the tenant is responsible for all external and internal maintenance and insuring the building. It means that it’s vital that you read through your tenancy agreement in full before signing it and seek legal advice if you think you need it. If your lease is an FRI lease, you are liable for a leaking roof in your commercial property.

It’s important to ensure that you have a schedule of condition for the property, which will mean that you only have to restore the commercial property back to the condition that it was in when you took over. It’s also worth getting the roof inspected before you sign the lease, as if there is any damage before you sign the landlord may be responsible.

The best way to avoid having to pay for a leaking roof in a commercial property is prevention. If you are liable for repairs and maintenance, make sure you have the roof inspected regularly by a reputable company to avoid having to pay for costly repairs when disaster strikes.

Commercial roofing

Other Top Projects in Tintagel

Are you a roofer in Tintagel?

We can help you get more commercial roofing work with our qualified job leads and boost your business.

Join today