What to put over a broken window?

A broken window is a nuisance and an unwanted expense, and it can often happen at the worst times, like overnight when installers aren’t available or when the weather is very bad. So you might need to put something over your broken window as a temporary measure before someone can come and replace it – but what should you use? If you’ve got a small crack, you could try using some masking tape. Cover the entire crack with the tape making sure that there is extra tape at each end of the crack. This will help to prevent the crack from growing further. However, this isn’t going to work on large impact cracks or shattered windows. For a shattered window, you need to make sure you remove all the remaining glass as the shards could easily cut someone. To make a broken window like this safe, you’ll need: Thick gloves A hammer A broom A vacuum cleaner Thick-soled shoes Safety goggles Put your gloves on and use the hammer to remove the rest of the glass. Make sure you hit the glass away from you. Using the broom, sweep away any loose glass from the area, making sure you do both inside and outside. Use your vacuum cleaner to remove any small pieces of glass that you might not have been able to see. Once you’ve cleared up the mess, you’ll want to cover your broken window with plastic and tape. It’s only a temporary measure so make sure you get in touch with a professional as soon as possible. Cut some heavy-duty plastic to fit the entire window. Using duct tape, secure the plastic over the window and make sure all the sides are sealed properly. It’s best to ensure that the plastic stays taught over the frame so it doesn’t get caught by the wind. Make sure you get in touch with a glazier or window installer as soon as you can – you'll notice a draught very quickly and someone could easily come and rip the plastic off. If you’re very worried about this you might want to add a chipboard over the top to make it more secure.

Replacement Glass (Glazing) in Birchington

Obtain Replacement Glass (Glazing) Prices in Birchington

Replacement Glass (Glazing) in Birchington

Are you seeking Glaziers in Birchington? Our network of glaziers can aid with your job. Every one of our Window Installer in Birchington are examined so you can see local consumer reviews, when the business was formed, ratings, satisfaction and cost permitting you to make the right decision on who to work with. Allow us take the inconvenience out of locating as much as 4 experts for your Glaziers task.

Glaziers reduced, form and also mount glass for a selection of reasons including windows, showers and mirrors. It's a really specialist profession and also should not be attempted by an amateur.

Glaziers can be needed for both residential and also industrial glass installments and whatever your glazing needs; you'll be able to locate help from these certified tradesmen.

Why would I require a glazier?

Among the most prominent factors for requiring a glazier would certainly be to change a smashed window pane. Glaziers will certainly have the ability to cut and also form the pane rapidly as well as effectively to boost your residence's safety and security as well as alleviate your mind.

We will provide as much as four Glaziers pros in your area, that will certainly offer quotations for the job you want done. You'll obtain a home visit from specialists in Birchington that'll help you to pick the appropriate Glaziers for your house prior to performing the setup. Enter your postal code to start looking now.

Average Glaziers cost in Birchington

The regular cost of Glaziers is £75. Costs alter based on the materials and the business picked. The upper price range can be as high as £86.25. The material costs are in most cases approximately £18.75

Average price per Glaziers job in 2026

Avg. price low	Avg. price low £57
Avg. price	Avg. price £75
Avg. price high	Avg. price high £87

£200

£150

£100

£50

£0

Prices based on actual Glaziers costs for Birchington, as reported by local LeadsDoWork members.

Glaziers installation cost in Birchington 2026

	Labour cost	£53
	Material cost	£19
	Waste removal	£4

Time frame: 1 day

Glaziers searches in June 2026

Choose your search type

No. of estimated projects Estimates by cities and towns

Glaziers Projects in Birchington in May 2026

359

Requests for quotations in Birchington in May 2026

0

Requests for Glaziers quotations in Birchington in May 2026. 0% change from April 2026.

0

Requests for Glaziers quotations in Kent in May 2026. 0% change from April 2026.

Source: Numbers calculated based on the search volumes in major search engines

Glaziers searches in cities and towns near Birchington May 2026

Glaziers near you

Choose locations

Towns and Cities near Birchington Other locations within South East

Birchington

Birchington-on-Sea is a village within north east Kent, England. It is a part of the Thanet district and forms a part of the civil parish of Birchington. It is found on the coast facing the North Sea, east of the Thames Estuary, in between the seaside resorts of Herne Bay and Margate. As a seaside resort, the village is a tourist and retirement location. Minnis Bay, in the village is a family beach with attractions like sailing, windsurfing, a paddling pool and coastal walking routes. Its 3 smaller beaches are surrounded by chalk cliffs, cliff stacks and caves. The village was 1st recorded in 1240. Its parish church, All Saints', dates to the thirteenth century and its churchyard is the burial place of the 19th-century Pre-Raphaelite artist Dante Gabriel Rossetti. Quex Park, a nearby nineteenth century manor house, is home to the Powell-Cotton Museum in addition to a twelve-bell tower constructed for change ringing. The museum contains a large collection of stuffed exotic animals collected by Major Percy Powell-Cotton on his travels in Africa, and also features artifacts unearthed in and around Birchington by his daughter, Antoinette Powell-Cotton, a keen archaeologist. As per the 2011 census, the village had around 9,961 permanent residents and around 4,944 households. As a seaside resort, the village's economy is primarily based around tourism, with various hotels, caravan parks and leisure attractions. The industry of employment of residents in 2011 was 16.1% retail, 17.2% health and social work, 5.8% manufacturing, 9.6% construction, 4.9 per cent transport and storage, and 4.3% hotels and restaurants. The village shopping centre attracts walk-in trade from visitors to the area. For all of your home upgrades, be sure that you employ trustworthy specialists in Birchington-on-Sea to ensure that you get the very best quality service.

Looking for Glaziers in Birchington?

Get free quotes from local window installers

Are you the property owner: Tenant (with permission) What level of service do you require: Repair/glass only Property Type: Commercial How many windows do you need: 2-3 Windows Are you the property ow...

Post a similar request >

Local & reliable window installers near me

Tell us about your glaziers project

Answer a few quick questions, so we can match you with local window installers who can help.

Find up to 4 window installers in Birchington

Get free, no-obligation local glaziers quotes from 4 verified window installers working in Birchington.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love Local Quotes it's a big part of my …

Love Local Quotes it's a big part of my Business I would recommend to anyone

FAQs

If the glass in your window has been damaged, you might only need to replace that rather than your whole window frame. Common reasons for needing to replace the glass in your window include:

The glass has smashed from an impact such as a stone hitting it from a lawnmower
You have been broken into and suspects used the window to gain entry
The glass has blown (lost its airtightness) from constant water build-up around the seals, which is common in bathrooms
Extreme weather or pressure changes have caused a crack

If your frames are still intact and there’s nothing wrong with your window’s locks or trims, there’s no reason why you can’t just replace the sealed unit in your window. To help with the quotation process, a window installer may ask you to measure the glass for your window replacement. It’s pretty simple to just measure the sealed unit inside your window. There are just 3 steps you need to take:

Including the beading (the plastic and rubber seals around the windows that can be removed), measure the width of the window frame.
Do the same for the height of the window, making sure you include the beading.
Then, take 10mm off each measurement, and you have the approximate size of your glass.

A reputable window installer will still make their own measurements before confirming the size of the glass in your window and going ahead and ordering the replacement. Make sure you get a range of quotes from local and national installers so you can compare the price and their quotation process.

A broken window is a nuisance and an unwanted expense, and it can often happen at the worst times, like overnight when installers aren’t available or when the weather is very bad. So you might need to put something over your broken window as a temporary measure before someone can come and replace it – but what should you use? If you’ve got a small crack, you could try using some masking tape. Cover the entire crack with the tape making sure that there is extra tape at each end of the crack. This will help to prevent the crack from growing further. However, this isn’t going to work on large impact cracks or shattered windows. For a shattered window, you need to make sure you remove all the remaining glass as the shards could easily cut someone. To make a broken window like this safe, you’ll need:

Thick gloves
A hammer
A broom
A vacuum cleaner
Thick-soled shoes
Safety goggles

Put your gloves on and use the hammer to remove the rest of the glass. Make sure you hit the glass away from you.
Using the broom, sweep away any loose glass from the area, making sure you do both inside and outside.
Use your vacuum cleaner to remove any small pieces of glass that you might not have been able to see.

Once you’ve cleared up the mess, you’ll want to cover your broken window with plastic and tape. It’s only a temporary measure so make sure you get in touch with a professional as soon as possible. Cut some heavy-duty plastic to fit the entire window. Using duct tape, secure the plastic over the window and make sure all the sides are sealed properly. It’s best to ensure that the plastic stays taught over the frame so it doesn’t get caught by the wind. Make sure you get in touch with a glazier or window installer as soon as you can – you'll notice a draught very quickly and someone could easily come and rip the plastic off. If you’re very worried about this you might want to add a chipboard over the top to make it more secure.

Whether you need toughened glass in your windows depends on where the windows are in your home or business. Toughened glass is sometimes referred to as tempered or safety glass, and it just means it’s stronger than the standard glass that’s usually offered with double glazed windows. So how do you know if you need it?

Toughened glass is useful in areas of your home where you might come into contact with the windows if you were to trip and fall. If you put your hands out to steady yourself on standard glass the chances are it would break into large sharp pieces with jagged edges. Of course, this means that you could seriously cut yourself if this were to happen. With toughened glass, the structure of the glass is changed so that if it breaks it shatters into lots of tiny pieces, minimising the risk to you if you were to fall on it.

You might want to use toughened glass in patio doors, low windows or frames next to doors. It just means that you will be safer if the unlikely happens and you or a family member falls through the glass. There are certain requirements through Building Regulations with windows at a certain level, but any reputable window installer should be able to go through these with you if you need to replace your windows with toughened glass. The regulations will only apply to new windows – there's no need to switch your windows to toughened glass early, but when you do come to replace them you’ll need to make sure they meet the standard.

You can end up with a cracked glass window in a few ways. The most common one is when a rogue stone in the lawnmower hits the window or someone’s cricket or tennis game goes wrong and you end up with a ball through the window. Youi often end up with a ‘bullseye’ type crack that expands out from the point of impact. You can also get pressure and stress cracks from intense fluctuations in pressure and temperature. Unfortunately, there’s no way you can permanently fix cracked windows without replacing the entire sealed unit. An installer can replace a cracked glass window in less than an hour simply by taking out the sealed unit (the two panes of glass in double glazed windows) and replacing it with a new one. It costs an average of £110, but you could try to do it yourself for around £55. But what if you can’t get an installer to fix your window straight away? There is a DIY method you could try. As a temporary fix for your glass window, you can use a solvent-based adhesive like epoxy which will keep the glass intact and prevent further damage. You’ll also need:

Washing up liquid
Glass cleaner
A lint-free cloth or rag
A putty knife
A paper plate
Acetone

First, you’ll want to clean the glass using the washing up liquid and a damp cloth to remove any dust or oils. Leave it for a few minutes to dry, then create a mixture of epoxy by combining the hardener and the resin and stirring it on a paper plate. Using the putty knife, spread the mixture on the cracks, making sure you press gently to fill them. Leave it for at least 5 minutes to dry, then get rid of any excess by using some acetone on a dry cloth. Clean the window using some glass cleaner and another dry cloth, and you should have a temporary fix!

Other Top Projects in Birchington

Customer Reviews

Overall rating:

Birchington Glaziers installers are rated 4.1 out of 5 based on 1 reviews of 3 pros.

The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Glaziers projects that have been connected with Glaziers pros to help them. All Glaziers contractors All Birchington Glaziers contractors

Are you a window installer in Birchington?

We can help you get more glaziers work with our qualified job leads and boost your business.

Join today