Wooden Decking in Flint

Get Wooden Decking Prices in Flint

Trustpilot 4.5 stars
Home > Gardening & Landscaping Projects > Wooden decking > Flint

Wooden Decking in Flint

Wooden decking is an increasingly fashionable choice for providing outdoor seating areas in gardens. Because of the natural beauty of wood, they can be very elegant spaces which can be used year round with the addition of outside heating and illumination. Wooden decking is commonly installed in locations in front of patio or French doors where they can create a seamless transition between interior and exterior spaces. Wooden decking can come in any size or shape to suit any area. Curved designs or large areas connected by pathways can create an impressive effect. Wooden decking is relatively easy to install and causes little disruption, especially when compared to alternatives like patio or paving. It can even be installed over the top of a pre-existing patio. It is necessary however to make sure that your wooden decking is structurally sound and able to take the load of any furniture or plants that you want to use on the decking. There is a variety of types of wood that can be used in wooden decking. Often decking is constructed from hardwood, but there are softwoods available that fulfil the durability requirements. As hardwood decking will need maintenance, which generally entails yearly cleaning and staining for weather proofing, composite woods are becoming popular for use in wooden decking because they are stronger and require much less maintenance.

Average Wooden decking cost in Flint

The typical cost of Wooden decking is £1500. Costs can change based upon the materials and the firm hired. The upper price range can be as high as £1725. The material costs are commonly approximately £375

Average price per Wooden decking job in 2026

Avg. price low

Avg. price low
£1,125
Avg. price

Avg. price
£1,500
Avg. price high

Avg. price high
£1,725

£1900

£1425

£950

£475

£0

Prices based on actual Wooden decking costs for Flint, as reported by local LeadsDoWork members.

Wooden decking installation cost in Flint 2026

Labour cost £1,050
Material cost £375
Waste removal £75
Time frame: 1-4 days
Advertisement

Wooden decking on Google in Flint

Google searches that showed Local Quotes, 18 July to 15 October 2026

2,493

Searches that showed one of our pages for Flint, all services

Source: Google Search Console, the number of times our pages appeared in Google search results. It counts searches that showed the page, not quote requests.

Wooden decking searches near Flint, 18 July to 15 October 2026

31

Searches that showed our page for Wirral

12

Searches that showed our page for Deeside

4

Searches that showed our page for Birkenhead

Wooden decking near you

Flint

Flint is a town in Flintshire, Wales, lying on the estuary of the River Dee. Flint lies in north-east Wales, next to the River Dee, to the north of the town of Mold. Over the River Dee, the Wirral can be seen from Flint and views to the south of the town include Halkyn Mountain. Flint lies less than 12 miles from the English city of Liverpool, and closer to its metro location. Nevertheless, due to the two bays and rivers in between, driving distance is nearly two times as long. The name relates to the stoney platform on which the castle was constructed, and was first recorded in 1277 in the French form 'le Chaylou'. Flint has the oldest town charter in Wales, dating from 1284. It was previously Flintshire's county town, and is today the 3rd largest town in the county. According to the 2001 Census, the permanent resident population of the town of Flint was 12804, which increased to 12953 at the 2011 Census. About 18 per cent of the local population recognized themselves as Welsh, although the census had no tick box making it possible for them to do so. In 2011, Welsh identity was included and 57.1 per cent declared that they had Welsh, Welsh and British or other combined identity. A lot of people in Flint have some knowledge of the Welsh language, although proficiency does vary. English is the principal spoken language to be heard around the town. Among the town's most eye-catching images is the group of 3 tower blocks of flats near the town centre, which were built in the 1960s. For all your home improvements, be sure to find dependable experts in Flint to make certain of quality.

Looking for Wooden decking in Flint?

Get free quotes from local carpenters

Get free quotes

Similar Customer Enquiries for Wooden decking in and around Flint

04 Jul

Wooden decking

Liverpool - L25

Enquiry from: Gina G

Start Date: Immediate

Composite decking small area

Property: terrace

Post a similar request >

Advertisement

Local & reliable carpenters near me

Tell us about your wooden decking project

Answer a few quick questions, so we can match you with local carpenters who can help.

Find up to 4 carpenters in Flint

Get free, no-obligation local wooden decking quotes from 4 verified carpenters working in Flint.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Easy to use

Easy to use

People contact was quick

People contact was quick

Got immediate response saved time a ...

Got immediate response saved time and money

FAQs

How to make steps for a deck?
Unless you built a ground-level deck, you’re going to need steps to go with it. Check Building Regulations to see if you need to install handrails as well. It’s good practice to:
  • Have a step tread width of 900mm – if you don’t want them that wide, they should be no less than 760mm
  • Add a central step riser to stairs wider than 900mm to prevent them buckling
  • Add a step depth (the vertical distance between each step) of between 150 and 180mm if building your own riser, so the steps are at a comfortable depth
Getting started To build your steps for the deck, you’ll need:
  • Step treads (the actual step themselves)
  • Step risers
  • Coach screws
  • Deck screws
  • Saw
  • Drill
Make the steps for your deck
  1. Make sure the ground where you want to put your steps is level and firm. If it’s not, consider laying concrete or paving slabs to provide a secure surface for your steps to sit so they don’t sink.
  2. Grab some joist off-cuts and cut them to the same width as your step treads. Attach them to the step risers at the top and bottom using countersunk coach screws.
  3. Place the steps against the sub-frame of the deck; if you’ve put slabs down for support, make sure the steps sit in the middle of them. The longest edge of the stair riser should be on the slabs, and the short edge against the deck. Drill pilot holes through the step and sub-frame joist, then screw the step to the sub-frame with more coach screws.
  4. After drilling pilot holes, screw the treads into the risers at each end with deck screws.
  5. If you don’t want gaps between each stair, you can add joist off-cuts or deck boards. Measure the height and depth of the gap, then screw the off-cut or board into the step riser with two screws at each end.
How to lay decking on uneven ground?
There are two ways to lay decking on uneven ground. We’ve explained how to build a raised deck in our FAQ ‘How to build a raised deck’ above, and that’s great for uneven ground or sloped gardens. But there’s another way that you can lay decking on uneven ground if you don’t want a raised deck: you can create a level supporting base. We’ll go through the basics here. Materials you’ll need
  • Paving slabs – old or cheap ones are fine
  • Timber for the frame and legs
  • Type 1 MOT hardcore
How to lay decking on uneven ground
  1. Mark out the area as we explain in ‘How to lay decking’. Then, dig to 200mm below where you want to surface of the decking to be.
  2. Add a 50mm layer of hardcore and make sure it’s compact.
  3. Build the decking sub-frame as we describe in ‘How to build a deck frame’.
  4. Lay out paving slabs along the edges and in the centre of the area. This will help to spread the weight of the decking.
  5. Set the decking frame on the slabs, checking for high or low points and adding off-cuts of timber where needed. Don’t forget to sand and seal these off-cuts with decking preservative.
  6. Add your joists and then the deck boards, leaving the recommended gaps of expansion of between 5-8mm.
Building your decking on top of paving slabs is a good way to get it level, but you still may not be able to get as good a finish as if a professional did it. If you’re in any doubt, get in contact with some decking specialists and see what they would recommend.
Will I need safety barriers or balustrades for my decking?

If your deck isn’t going to be flat to the ground, it’s a good idea to have some kind of balustrade to avoid any tripping. If the gap between the deck and the ground is less than 600mm, use a 900mm balustrade. If it’s higher than 600mm, the balustrade should be 1100mm tall.

How much decking do I need?
How much decking you need will – of course – depend on how big you plan your deck to be. There is an equation to help you work out how many deck boards you need. It’s a little complicated until you’ve been shown how it works, but once you know how to do it it’s easy to work out how much decking you need for any project. The equation takes into account the recommended 10% wastage and includes the expansion gaps that are required, which is between 5-8mm along the length of the deck boards (EGL, or expansion gap length) and 3mm along the ends of the deck boards (EGW, or expansion gap width) for timber. It also assumes you’re laying your decking horizontally, as if you’re looking for a diagonal or chevron design you’ll need more deck boards. Let’s go through an example, assuming you have a 10m x 6m area that you want to cover with decking made from timber boards that are 2.4m long and 144mm wide. We’ll use the EGL of 5mm and EGW of 3mm.
  1. Calculate the surface area for your decking Multiply the length (L) of your decking area by the width (W): L x W = Decking Surface Area (DSA) in m2 10 x 6 = 60m2
  2. Work out the coverage of your deck boards Add your deck board width (DBW) to the expansion gap length (EGL), then add the deck board length (DBL) to the expansion gap width (EGW). Then multiply these numbers. (DBW + EGL) x (DBL + EGW) = Single Board Coverage (SBC) 0.144m + 0.005m = 0.149m 2.4m + 0.003m = 2.403m 0.149 x 2.403 = 0.358m2
  3. Calculate the number of deck boards you need Multiply the SBC by 1.1 to allow for 10% wastage. Then, divide the DSA by the SBC. DSA / SCB x 1.1 = Total number of boards required 60m2 / 0.358m2 x 1.1 = 184.36 boards – so round up to 185 so you’re not left short.
If that all seems a bit complicated for you, let a professional do the maths – they will be able to give you an idea of how much decking you’ll need in no time.
Wooden decking

Other Top Projects in Flint

Related Projects

Customer Reviews

Overall rating:


Flint Wooden decking pros are rated 3.9 out of 5 on average: 4 rated pros, 18 reviews, of 23 pros covering the area.
The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Wooden decking projects that have been connected with Wooden decking pros to help them. All Wooden decking contractors All Flint Wooden decking contractors

Useful Wooden decking Links

Protect your home from the winter storms ahead Five tips to use space more efficiently What improvement can add £55,000 to your home? Sell your home with the right kerb appeal How can you improve the outside of your home? Home number ones for the summer Sell your home this summer: Seven must see tips Four projects to improve your home this spring Protect your home from flooding this spring 10 essential tips for December How to get your home ready for the winter Five home improvements for the half-term week Home improvements on a budget

Need more help?

Are you a carpenter in Flint?

We can help you get more wooden decking work with our qualified job leads and boost your business.

Join today