Wooden Decking in Riding Mill

Compare Wooden Decking Prices in Riding Mill

Trustpilot 4.5 stars
Home > Gardening & Landscaping Projects > Wooden decking > Riding Mill

Wooden Decking in Riding Mill

Wooden decking is an increasingly common option for creating outdoor seating areas in gardens. Because of the natural beauty of wood, they can be very elegant spaces which you can use year round by using additional heating and lighting. Wooden decking is commonly installed in locations in front of patio or French doors where they can create a smooth transition between interior and exterior spaces. Wooden decking can come in any size or shape to accommodate any area. Curved designs or large areas joined by pathways can produce an attractive effect. Wooden decking is fairly quick to install and causes little disruption, particularly when compared to alternatives like patio or paving. It can even be installed over the top of a pre-existing patio. It is vital however to make sure that your wooden decking is structurally sound and able to take the weight of any furniture or plants that you would like to use on the decking. There is a variety of types of wood that can be used in wooden decking. Commonly decking is made of hardwood, but there are softwoods available that fulfil the durability requirements. As hardwood decking will demand maintenance, which commonly requires annual cleaning and staining for weather proofing, composite woods have become popular for use in wooden decking as they are stronger and require much less maintenance.

Average Wooden decking cost in Riding Mill

The typical cost of Wooden decking is £1500. Costs can change based upon the materials and the firm hired. The upper price range can be as high as £1725. The material costs are commonly approximately £375

Average price per Wooden decking job in 2025

Avg. price low

Avg. price low
£1,125
Avg. price

Avg. price
£1,500
Avg. price high

Avg. price high
£1,725

£1900

£1425

£950

£475

£0

Prices based on actual Wooden decking costs for Riding Mill, as reported by local LeadsDoWork members.

Wooden decking installation cost in Riding Mill 2025

Labour cost £1,050
Material cost £375
Waste removal £75
Time frame: 1-4 days

Wooden decking searches in June 2025

Wooden decking Projects in Riding Mill in May 2025

90

Requests for quotations in Riding Mill in May 2025

0

Requests for Wooden decking quotations in Riding Mill in May 2025. 0% change from April 2025.

0

Requests for Wooden decking quotations in Northumberland in May 2025. 0% change from April 2025.

Source: Numbers calculated based on the search volumes in major search engines

Wooden decking searches in cities and towns near Riding Mill May 2025

Wooden decking near you

Riding Mill

Riding Mill is a village near Hexham in Northumberland, England. It is part of the civil church of Broomhaugh and also Riding. It is offered by Riding Mill train station and by a regular bus solution on the path from Hexham to Newcastle. Riding Mill is significant as the location of Riding Mill pumping station. Up up until right here the water released from Kielder Water uses the River Tyne however at Riding Mill it is pumped to parts of Tyne and also Wear and over the hills to Teesside. Leaving the village in the direction of Hexham, Hollin Hill Terrace is located on the left. Really little info is offered on these 8 residences yet they are a fine instance of Victorian design. This terrace was not shown on maps of the area prior to 1850, yet appear on a map dated between 1850/1894. During 2008 the town was called one of the most costly location to live outdoors London.

Looking for Wooden decking in Riding Mill?

Get free quotes from local carpenters

Get free quotes

Wooden decking pros in Riding Mill

Green Acres

12 review(s)
Based: in Newcastle, NE4 9BF

Landscaping, tidy ups regular maintenance,paving, decking, fencing,turf ,gravel All aspects of garden work undertaking

Latest review

Liz V., DH9
4

Garden | Decking in Stanley

We thought that they were very good and gave us plenty information about what they were doing

See other Wooden decking Pros in Riding Mill

Local & reliable carpenters near me

Tell us about your wooden decking project

Answer a few quick questions, so we can match you with local carpenters who can help.

Find up to 4 carpenters in Riding Mill

Get free, no-obligation local wooden decking quotes from 4 verified carpenters working in Riding Mill.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How to make steps for a deck?
Unless you built a ground-level deck, you’re going to need steps to go with it. Check Building Regulations to see if you need to install handrails as well. It’s good practice to:
  • Have a step tread width of 900mm – if you don’t want them that wide, they should be no less than 760mm
  • Add a central step riser to stairs wider than 900mm to prevent them buckling
  • Add a step depth (the vertical distance between each step) of between 150 and 180mm if building your own riser, so the steps are at a comfortable depth
Getting started To build your steps for the deck, you’ll need:
  • Step treads (the actual step themselves)
  • Step risers
  • Coach screws
  • Deck screws
  • Saw
  • Drill
Make the steps for your deck
  1. Make sure the ground where you want to put your steps is level and firm. If it’s not, consider laying concrete or paving slabs to provide a secure surface for your steps to sit so they don’t sink.
  2. Grab some joist off-cuts and cut them to the same width as your step treads. Attach them to the step risers at the top and bottom using countersunk coach screws.
  3. Place the steps against the sub-frame of the deck; if you’ve put slabs down for support, make sure the steps sit in the middle of them. The longest edge of the stair riser should be on the slabs, and the short edge against the deck. Drill pilot holes through the step and sub-frame joist, then screw the step to the sub-frame with more coach screws.
  4. After drilling pilot holes, screw the treads into the risers at each end with deck screws.
  5. If you don’t want gaps between each stair, you can add joist off-cuts or deck boards. Measure the height and depth of the gap, then screw the off-cut or board into the step riser with two screws at each end.
How to lay decking on uneven ground?
There are two ways to lay decking on uneven ground. We’ve explained how to build a raised deck in our FAQ ‘How to build a raised deck’ above, and that’s great for uneven ground or sloped gardens. But there’s another way that you can lay decking on uneven ground if you don’t want a raised deck: you can create a level supporting base. We’ll go through the basics here. Materials you’ll need
  • Paving slabs – old or cheap ones are fine
  • Timber for the frame and legs
  • Type 1 MOT hardcore
How to lay decking on uneven ground
  1. Mark out the area as we explain in ‘How to lay decking’. Then, dig to 200mm below where you want to surface of the decking to be.
  2. Add a 50mm layer of hardcore and make sure it’s compact.
  3. Build the decking sub-frame as we describe in ‘How to build a deck frame’.
  4. Lay out paving slabs along the edges and in the centre of the area. This will help to spread the weight of the decking.
  5. Set the decking frame on the slabs, checking for high or low points and adding off-cuts of timber where needed. Don’t forget to sand and seal these off-cuts with decking preservative.
  6. Add your joists and then the deck boards, leaving the recommended gaps of expansion of between 5-8mm.
Building your decking on top of paving slabs is a good way to get it level, but you still may not be able to get as good a finish as if a professional did it. If you’re in any doubt, get in contact with some decking specialists and see what they would recommend.
How much decking do I need?
How much decking you need will – of course – depend on how big you plan your deck to be. There is an equation to help you work out how many deck boards you need. It’s a little complicated until you’ve been shown how it works, but once you know how to do it it’s easy to work out how much decking you need for any project. The equation takes into account the recommended 10% wastage and includes the expansion gaps that are required, which is between 5-8mm along the length of the deck boards (EGL, or expansion gap length) and 3mm along the ends of the deck boards (EGW, or expansion gap width) for timber. It also assumes you’re laying your decking horizontally, as if you’re looking for a diagonal or chevron design you’ll need more deck boards. Let’s go through an example, assuming you have a 10m x 6m area that you want to cover with decking made from timber boards that are 2.4m long and 144mm wide. We’ll use the EGL of 5mm and EGW of 3mm.
  1. Calculate the surface area for your decking Multiply the length (L) of your decking area by the width (W): L x W = Decking Surface Area (DSA) in m2 10 x 6 = 60m2
  2. Work out the coverage of your deck boards Add your deck board width (DBW) to the expansion gap length (EGL), then add the deck board length (DBL) to the expansion gap width (EGW). Then multiply these numbers. (DBW + EGL) x (DBL + EGW) = Single Board Coverage (SBC) 0.144m + 0.005m = 0.149m 2.4m + 0.003m = 2.403m 0.149 x 2.403 = 0.358m2
  3. Calculate the number of deck boards you need Multiply the SBC by 1.1 to allow for 10% wastage. Then, divide the DSA by the SBC. DSA / SCB x 1.1 = Total number of boards required 60m2 / 0.358m2 x 1.1 = 184.36 boards – so round up to 185 so you’re not left short.
If that all seems a bit complicated for you, let a professional do the maths – they will be able to give you an idea of how much decking you’ll need in no time.
Can I fit a hot tub on my terrace or decking?

Yes, although you should make sure that the terrace or decking is able to support the weight of a hot tub. Usually, you will need to have a structural survey carried out on the area. Seek the advise of a hot tub retailer or installer about the logistics of installing one at your property.

Placholder Image

Other Top Projects in Riding Mill

Related Projects

Customer Reviews

Overall rating:


Riding Mill Wooden decking installers are rated 4.7 out of 5 based on 2 reviews of 30 pros.
The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Wooden decking projects that have been connected with Wooden decking pros to help them. All Wooden decking contractors All Riding Mill Wooden decking contractors

Useful Wooden decking Links

Are you a carpenter in Riding Mill?

We can help you get more wooden decking work with our qualified job leads and boost your business.

Join today