Wooden Decking in Tavistock

Request Wooden Decking Prices in Tavistock

Home > Gardening & Landscaping Projects > Wooden decking > Tavistock

Wooden Decking in Tavistock

Wooden decking is an increasingly common choice for creating outdoor seating areas in gardens. Because of the natural beauty of wood, they can be very fashionable areas that can be used year round by installing outside heating and illumination. Wooden decking is generally installed in locations in front of patio or French doors where they can create a smooth transition between inside and outside spaces. Wooden decking is available in any size or shape to suit any area. Curved designs or large areas connected by pathways can create a stunning effect. Wooden decking is reasonably quick to install and causes little disruption, particularly in comparison to alternate options like patio or paving. It could even be installed over the top of a pre-existing patio. It is crucial however to make certain that your wooden decking is structurally sound and capable of taking the weight of any furniture or plants that you would like to use on the decking. There is a collection of types of wood that can be used in wooden decking. Usually decking is constructed from hardwood, but there are softwoods available that fulfil the durability requirements. As hardwood decking will need maintenance, which generally requires yearly cleaning and staining for weather proofing, composite woods have become more popular for use in wooden decking because they are stronger and require far less maintenance.

Average Wooden decking cost in Tavistock

The typical cost of Wooden decking is £1500. Costs can change based upon the materials and the firm hired. The upper price range can be as high as £1725. The material costs are commonly approximately £375

Average price per Wooden decking job in 2026

Avg. price low

Avg. price low
£1,125

Avg. price

Avg. price
£1,500

Avg. price high

Avg. price high
£1,725

£1900

£1425

£950

£475

£0

Prices based on actual Wooden decking costs for Tavistock, as reported by local LeadsDoWork members.

Wooden decking installation cost in Tavistock 2026

Labour cost £1,050
Material cost £375
Waste removal £75
Time frame: 1-4 days
Advertisement

Wooden decking on Google in Tavistock

Google searches that showed Local Quotes, 26 July to 23 October 2026

728

Searches that showed one of our pages for Tavistock, all services

Source: Google Search Console, the number of times our pages appeared in Google search results. It counts searches that showed the page, not quote requests.

Tavistock

Tavistock is an ancient stannary and market town within West Devon in England. It rests on the River Tavy where its name obtains. According to the 2011 Census, the town has a permanent population of around 12,280. Its history can be gone back to at least AD 961 when Tavistock Abbey was created, whose ruins can be seen depending on the centre of the community. One of the most noteworthy person to have actually resided in the town is Sir Francis Drake. Tavistock has lots of buying as well as home entertainment possibilities for its citizens. The marketplace proceeds to operate in the huge protected market structure, the Pannier Market; the primary market gets on Fridays, on other days the marketplace hosts specialised occasions, such as craft fairs and also antiques fairs. A Farmers' Market takes location in the Square fortnightly and has been elected Best Farmer's Market in the South West. In 2005, Tavistock was elected 'Best Market Town' in England as well as in 2006 'Best Food Town', greatly on the strength of the numerous independent food stores as well as vendors in the town and also nearby, such as a long-standing household grocer and also deli in Brook St as well as celebrity store behind the Pannier market. In July 2006, Tavistock got the name of the eastern Entrance to the Cornish Mining World Heritage Site, which runs westward through the Tamar Valley and Great Consols Mine, down the spinal column of Cornwall to Lands End. A regional area group referred to as 'Tavistock Forward', have actually been discussing to take control of the Guildhall facility with police and English Heritage endorsement, with lease-back of the existing cops terminal to Devon and Cornwall Cops, while developing the Guildhall itself. For every one of your residence improvements, make sure to identify reliable professionals in Tavistock to make specific of quality.

Looking for Wooden decking in Tavistock?

Get free quotes from local carpenters

Get free quotes

Wooden decking pros in Tavistock

A1 FENCING & DECKING

15 review(s)
Based: in Plymouth, PL4 6NL

All types of domestic and garden and security fencing catered for free quotations no job too big or small

Latest review

Jeanne M., PL12
5

Garden Decking in Saltash

The installation of the decking was very good but they did not clear up any of the mess afterwards so no stars for this

Similar Customer Enquiries for Wooden decking in and around Tavistock

12 Apr

Wooden decking

Torpoint - PL11

Enquiry from: Christine G

Start Date: Immediate

Repair or replace decking

Post a similar request >

07 Apr

Wooden decking

Saltash - PL12

Enquiry from: Nicola H

Start Date: Immediate

Wooden decking Lead Wooden decking Lead

Wooden decking replaced front and back of house (address removed) saltash

Property: terrace

Post a similar request >

Advertisement

Local & reliable carpenters near me

Tell us about your wooden decking project

Answer a few quick questions, so we can match you with local carpenters who can help.

Find up to 4 carpenters in Tavistock

Get free, no-obligation local wooden decking quotes from 4 verified carpenters working in Tavistock.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Easy to use

Easy to use

People contact was quick

People contact was quick

Got immediate response saved time a ...

Got immediate response saved time and money

FAQs

How to build a deck frame?
Building a simple deck frame, or decking subframe, that you’re laying on level ground is easy if you take time to prepare and get all the things you need. We’ll go through the steps on how to build a deck frame here. Tools and equipment To get building your deck frame, you’ll need:
  • Decking joists
  • Coach screws
  • Coach bolts
  • Combi drill
  • Socket set
  • A saw suitable for your project and the thickness of the timber
  • Pencil
  • Decking preservative
  • Sandpaper or sander
Build your subframe
  1. Measure your deck frame and cut to size if necessary.
  2. Make 2 pencil marks on each end of the frame’s 2 outer joists to mark where the coach screws will go. They need to align with the centre of the adjoining outer joist. Then, use a flat wood drill bit to drill recesses into each mark. Make them the same depth of the screws that your using’s head and wide enough for a ratchet or socket to tighten them.
  3. Using a thinner drill bit, line up the outer joists and drill a pilot hole through the middle of the recess. These pilot holes act as a guide for the screws and stops them from splitting the wood.
  4. Fit the coach screws with either a drill driver or socket and ratchet.
  5. Repeat the process for the inner joists once you’ve assembled the outer frame.
IMPORTANT: While you’re building your deck frame and the decking itself, remember to cover all pilot holes and ends of timber in decking preservative to ensure that your decking remains structurally sound for as long as possible. Though relatively simple, building a deck frame and the decking will take some time. It would be much quicker and easier to get a professional in to do it, who could represent more value for money.
How to make steps for a deck?
Unless you built a ground-level deck, you’re going to need steps to go with it. Check Building Regulations to see if you need to install handrails as well. It’s good practice to:
  • Have a step tread width of 900mm – if you don’t want them that wide, they should be no less than 760mm
  • Add a central step riser to stairs wider than 900mm to prevent them buckling
  • Add a step depth (the vertical distance between each step) of between 150 and 180mm if building your own riser, so the steps are at a comfortable depth
Getting started To build your steps for the deck, you’ll need:
  • Step treads (the actual step themselves)
  • Step risers
  • Coach screws
  • Deck screws
  • Saw
  • Drill
Make the steps for your deck
  1. Make sure the ground where you want to put your steps is level and firm. If it’s not, consider laying concrete or paving slabs to provide a secure surface for your steps to sit so they don’t sink.
  2. Grab some joist off-cuts and cut them to the same width as your step treads. Attach them to the step risers at the top and bottom using countersunk coach screws.
  3. Place the steps against the sub-frame of the deck; if you’ve put slabs down for support, make sure the steps sit in the middle of them. The longest edge of the stair riser should be on the slabs, and the short edge against the deck. Drill pilot holes through the step and sub-frame joist, then screw the step to the sub-frame with more coach screws.
  4. After drilling pilot holes, screw the treads into the risers at each end with deck screws.
  5. If you don’t want gaps between each stair, you can add joist off-cuts or deck boards. Measure the height and depth of the gap, then screw the off-cut or board into the step riser with two screws at each end.
How to build decking on a slope?
You might think that building decking on a slope is a no-go, but it’s actually a great way to help you make use of your garden when the ground is sloping. It will provide you with a level surface that you can BBQ on as well as dine alfresco without finding that your meal is rolling down the table. But how do you build decking on a slope? Our guide in the FAQ above, ‘How to build a raised deck’, is the perfect solution – but we’ll break it down here if you just want to get an idea of what’s involved. Dig out the area If you’re laying on soil or turf, you’ll need to dig it out. Dig down and remove all the turf from the area and ensure that there are no weeds or stones in the area you’re going to build your decking on. Since you’re building on a slope, it will be hard to get it level, but dig out to a depth of 50mm and lay weed-control fabric with gravel over the top. Add posts and set with concrete Make holes for posts and add them in, ensuring they’re longer than you need. Make sure they’re level, then fill the holes with a concrete mix to set them in place. Build the outer frame Make sure you always work at the top of the slope when you’re building your decking, and measure where the highest point of the decking will be. Secure the 4 sides of the outer frame and factor in a 2mm fall for every metre of decking so rainwater can run off. Add joists Secure joists along your frame at 400mm intervals. If you get to the last joist and there will be more than a 400mm gap left at the end, add in an extra one for support. Lay your deck boards Screw your deck boards to the joists, ensuring that the deck boards are running in the opposite direction to the joists. For timber boards, you need to make sure you leave an expansion gap of 5-8mm. These steps should give you an idea of whether you want to have a go at building decking on a slope, or whether you want to leave it to the pros.
How much decking do I need?
How much decking you need will – of course – depend on how big you plan your deck to be. There is an equation to help you work out how many deck boards you need. It’s a little complicated until you’ve been shown how it works, but once you know how to do it it’s easy to work out how much decking you need for any project. The equation takes into account the recommended 10% wastage and includes the expansion gaps that are required, which is between 5-8mm along the length of the deck boards (EGL, or expansion gap length) and 3mm along the ends of the deck boards (EGW, or expansion gap width) for timber. It also assumes you’re laying your decking horizontally, as if you’re looking for a diagonal or chevron design you’ll need more deck boards. Let’s go through an example, assuming you have a 10m x 6m area that you want to cover with decking made from timber boards that are 2.4m long and 144mm wide. We’ll use the EGL of 5mm and EGW of 3mm.
  1. Calculate the surface area for your decking Multiply the length (L) of your decking area by the width (W): L x W = Decking Surface Area (DSA) in m2 10 x 6 = 60m2
  2. Work out the coverage of your deck boards Add your deck board width (DBW) to the expansion gap length (EGL), then add the deck board length (DBL) to the expansion gap width (EGW). Then multiply these numbers. (DBW + EGL) x (DBL + EGW) = Single Board Coverage (SBC) 0.144m + 0.005m = 0.149m 2.4m + 0.003m = 2.403m 0.149 x 2.403 = 0.358m2
  3. Calculate the number of deck boards you need Multiply the SBC by 1.1 to allow for 10% wastage. Then, divide the DSA by the SBC. DSA / SCB x 1.1 = Total number of boards required 60m2 / 0.358m2 x 1.1 = 184.36 boards – so round up to 185 so you’re not left short.
If that all seems a bit complicated for you, let a professional do the maths – they will be able to give you an idea of how much decking you’ll need in no time.
Wooden decking

Other Top Projects in Tavistock

Are you a carpenter in Tavistock?

We can help you get more wooden decking work with our qualified job leads and boost your business.

Join today