Composite Doors in Ayr

Do you have a composite door and wondering the best type of lock that can be used on your prized asset. To choose the right type of lock for a composite door, it’s of utmost importance to select one that’s designed to work perfectly with the composite configuration. By doing this, you’ll improve the security of your home while also achieving the desired look. To secure a composite door, the most common way is by incorporating a high security multipoint lock. Therefore, depending on the look you want for your door as well as how you want it to function, here are the four types of locks you can consider to go with your composite door.

• Split Spindle Lock

A split spindle lock would be your best bet if you’d like to automatically prevent access to your home from the outside. This lock allows you to open your door smoothly by utilizing the inside handle, however, you’ll need a key to turn the latch bolt to gain access back inside.

• Lever or Lever Lock

If you want an unhindered access in and out of your property, a lever lock gives you this opportunity without the need for a key until it’s totally deadlocked. The lever lock is installed to the back door which makes unauthorized entry even less likely.

• Slam Lock

If you’d prefer a super fast locking, then this lock type is your answer! It automatically triggers the lock hooks immediately you close the door - without having to lift the handle. However, to gain access to the inside of your home or bolt the door from the inside, you’ll need a key.

• Key Wind-Up Lock

This lock is wholly key operated and totally handle-free. Immediately the door is closed, the latch bolt will be automatically activated, ensuring that a key would be needed to gain access back inside.

More often than not, when we think about replacing our old or existing door with a new unit, we tend to get a bit creative. We think about the panel to use, but often forget about the door’s frame which is just as important. The frame is way beyond an ordinary trimming that serves as a boundary for the slabs, it also ensures the door opens with ease and also sees that heat are being locked in and security is tight. There are a variety of frame options available when fitting a new door, and putting a composite door in a uPVC frame is one. In this article, we’ll give you an idea of the great effects of composite door and uPVC frame combination and help you make informed decision about the best setup that’ll perfectly satisfy all your doorway needs and budget.

Putting a composite door in a uPVC frame or a uPVC door in a composite frame is without a doubt the most popular door/frame combinations. In fact, you’d be shocked just how well a composite door and uPVC frame complements and supports each other in either alteration. If you’re the type that likes the unmatched levels of insulation, visual appeal as well as security that’s provided by composite doors, fitting this in a UPVC frame is really one that’ll set you apart. This combination is the most loved and for a good reason. You’ll get to open your door with ease while it also remains weathertight, save some money using the usually less costly uPVC frames and ultimately, combine the strengths of both materials incorporated. What’s more? It’s an opportunity for you to make a striking impression on all your visitors.

If you’re going through new constructions or renovations and looking to change your old front door and install a brand new composite door, then you’re at the right place. Composite door fitting can be a DIY project but it’s essential to have the necessary training and experience before commencement. If not, we’d recommend you hire the services of a reliable professional to guarantee the best results and save yourself some time and money.Here, we’ll give a good insight into the composite door fitting process.

To get started, here are some of the tools that may be required - tape measure, hammer, stanley knife, crowbar, chisel, saw. Silicone sealant gun, spirit levels, electric drill ( including the hammer section), rubber mallet and 6mm socket spanner.

lPreparation

• Remove the existing door by rounding up the door frame firstly with a knife to reduce the possible damage to the wall.

• Cut through the door jambs.

• Remove each in two separate sections.

• Ensure the opening is level without any screws, mastic and filler.

lAlign Your Composite Door

• Ensure the sill of the door is level and flat.

• Make sure the frame is square and plumb in both planes.

• Bridge the cavity of the wall and cover the DPC

• Ensure that the frame is square. If not, your composite door won’t function as it should.

lInstall Your Composite Door

• Place the door in the frame.

• Hold the frame firmly in position with wedge packers

• Make sure the packers are positioned close to where the fixing will be placed.

• Make sure the jams are square and plumb in all planes by using a long spirit level.

• Secure the frame to the brickwork with the use of a drill.

• Place the fixings at the top and bottom of each hinge as well as each of the lock keep.

• Top fixings should be fitted 150mm and 250mm from each corner.

Composite front doors offer a wide range of benefits which includes numerous style and colour options, increased security, personalization options, durability as well as low maintenance requirements. However, with so many options available in the market, it’s also expected that the prices would vary greatly depending on many factors. These factors include the colour, style of the composite door, glazing option, door furniture as well as security locks.

• Colour - More popular and basic colours like white, blue and brown black are manufactured in mass, making them a bit lesser than the unusual colours as they usually go through an expensive colour mixing process.

• Style Of The Door - The most common and popular door styles are manufactured in large quantities and consequently, the cheaper option than the more complex styles. A good example is the six panel door that features two frosted glass inlays will definitely cost more than the four panel plain white composite door.

• Glazing Option - The glass type, design and panel size all play a huge role in determining the price. The more complex your glazing option is, the more money you’ll have to pay.

• Door Furniture - Several composite doors come with bespoke handles, letterplates and knockers to achieve your desired finish. The furniture additions on door can also play a huge role in influencing the overall cost of your composite door.

• Security Locks - Multi point locks typically comes as a standard. However, you might need to determine the type required by your as the quality and type can vary considerably.

Generally, to have a basic style composite door installed, you’ll have spend about £850 and above. And depending on the design requirements and glazing features you select, this price can increase significantly.