Internal or partition walls can be moved or knocked down in your property, which can change the room design and create a more substantial open plan room design for a spacious living space or a kitchen diner. When moving or knocking through interior walls, it is necessary to understand both the type of interior wall that it is, and whether or not it's a load bearing wall. Internal walls can be brick or block partitions, timber stud partitions, or even prefabricated wall panels. There are no shortcuts when it comes to determining whether a wall is load bearing or not, it is advisable to engage the services of a structural engineer if you are unclear or are not able to view original plans for your premises. Load bearing walls can be relocated, but this may also be more expensive and involves installing additional load bearing solution, like steel lintels. Moving or knocking through internal walls will typically involve demolition of the pre-existing wall, rebuilding or repairing the new walls, replastering and moving electrics. It could additionally necessitate adjustments to the floor, as in some cases the floors between rooms will not be completely level, and knocking through internal walls can reveal this. Generally moving internal walls won't require planning permission, but you'll need to comply with building regulations for insulation and sound proofing. Consulting with a structural engineer will ensure that any internal wall changes that you plan on doing will keep your property structurally sound.
The average cost of Plasterboard dry lining is £850. Costs vary based upon the materials and the tradesman hired. The upper price range can be as high as £977.5. The material costs are in most cases around £212.5
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£1100
£825
£550
£275
£0
| Labour cost | £595 | |
| Material cost | £213 | |
| Waste removal | £43 |
Searches that showed one of our pages for Kingston, all services
Searches that showed our Plasterboard dry lining page for London County
Searches that showed our page for West Byfleet
The Royal Borough of Kingston upon Thames is a borough in southwest London, England. The principle town is Kingston upon Thames and it includes Surbiton, Chessington, New Malden, Tolworth and a part of Worcester Park. It's the oldest of the four Royal Boroughs in England. The others are Kensington and Chelsea and Greenwich also in London, and Windsor and Maidenhead. The borough covers a total area of roughly 14.38 square miles.
In line with population estimates in the middle of 2014, Kingston upon Thames features a permanent population of around 169958 people. It has no present connections with London Overground that serves adjacent Richmond or London Tramlink that serves Wimbledon in the neighbouring borough of Merton. It has nine National Rail stations and a couple of centrally located bus stations. In 2008, 64 bus routes served Kingston. In March 2011, the primary types of transport that residents utilised to travel to work were driving a car or van, used by 26.1 percent of all residents aged 16-74 and train, utilised by 7.1 per cent, and bus, minibus or coach, utilised by 7.1 per cent.
Kingston has numerous attractions in and close to it, ranging from nature attractions and historical attractions to theme parks. This consists of Richmond Park, which is among the world's largest urban parks, and three times the size of Central Park in New York City.
London - SE14
Enquiry from: Sara H
Start Date: Immediate
Hello, We are looking at adding a meeting room onto our mezzanine (please email me so I can share images and dimensions). For this, we are looking at low cost partition walls. We will need 3 x walls (
London - N8
Enquiry from: Jurell F
Start Date: Immediate
Non-load bearing wall required to make 1 room, 2 rooms. Room is approximately 5m x 5m, 4m floor to ceiling
London - SW8
Enquiry from: Saba K
Start Date: Immediate
I'm looking to install a non-permanent or semi-permanent partition wall in my one-bedroom flat in London to create a second bedroom space. Here are the details: 2 metres x 4 metres Ceiling I’d like
Height: standard (~2.4m)
Answer a few quick questions, so we can match you with local builders who can help.
Get free, no-obligation local plasterboard dry lining quotes from 4 verified builders working in Kingston.
Compare customer reviews, services and prices, and choose the right tradesperson for you.
Great free service saves time and worry finding decent company
Excellent and highly recommend
Easy to use and put me in contact with an excellent contractor within 24 hours
How Much Plasterboard Do I Need?
Although many people especially contractors have a tough time estimating the number of drywall or plasterboard needed to complete a project, it’s a rather simple task if all factors are taken into consideration. If you’re able to follow the same procedures taken by professionals to count dry wall sheets, you’ll be in the right direction. Let’s have a look at the procedures to follow!
lTake Square Footage Measurement
• Measure the square footage of the area where the plasterboard will be fitted.
• Multiply the height by the width of each wall or ceiling area.
• Add all quantities to obtain a total square-foot amount.
lCalculate Drywall Sheets
• To calculate the number of drywall or plasterboard sheet is very simple once you’ve gotten the total square footage.
• To get started, simply divide the total square footage of area by 32 (that’s if you are using a 4 by 8 sheets) or you can also make use of 48 to make the division (only if you’re making use of the 4 by 12 sheets).
• The answer you get after the division will give you the full number of plasterboard sheets that’s required to complete the project.
We’d recommend you include an extra 10 to 15 percent of whatever you calculate to take care of the possible odd cuts and wastages. This implies that if your total area is 1600 square feet while incorporating 4 by 8 sheets, simply divide 1600 by 32 which equals 50 sheets, now take 10% of 50 which equals 5, then add back the 5 extra to the 50 sheets earlier calculated to get 55 sheets. If you wish to estimate the cost, simply multiply the number of sheets gotten by the price per sheet. Do not forget to include delivery charges and local taxes.
How To Put Up Plasterboard
Putting up a plasterboard is a vital process when it comes to home renovations. However as daunting as it may seem, with a good guide and regular practice you can master the skill within a small period of time. If you lack proper training and experience, we’d recommend you hire a seasoned professional plasterer for help so as to get the best result and also avoid additional costs due to possible damages.
Putting up plasterboard is way quicker than wet plastering and also significantly reduces the drying time that can slow down your renovation plans. With a plasterboard, you can delve straight into the decorating stage and achieve a smooth finish. Below are the steps required to put up a plasterboard.
• The first step is cutting the plasterboard to shape which be one of the most challenging parts of the process. This is because you’ll need to fit the board around things such as plug sockets and window sills. As a result, this involves cutting complex shapes rather than just a simple straight line. To get this done, simply mark out the cut required with the use of a tape measure, combination square and spirit level for a better precision. Once done, you can then use a plasterboard pad saw to cut along the marked spots.
• After you made the required cuts, the next step is putting up the plasterboard. And depending on where the boards are going to be put, this could be a very challenging task. If you’re going to put the boards on the ceiling or somewhere very high up, you’d probably need an extra pair of hands for help. To get this done, use the appropriate screws to secure the boards in place if you’re installing them directly on studs. However, if you’d be fixing them onto bricks or blocks, a drywall adhesive is your best bet.
What Is Plasterboard?
The plasterboard is unarguably one of the most common building materials across the globe. Sometimes referred to as gypsum board, gyprock, drywall or wall board, the plasterboard is mostly incorporated for ceiling cladding and interior walls in several homes and offices in recent times. However, despite its global acceptability, it’s a very misunderstood building material.
The plasterboard is manufactured using a gypsum core with a heavy paper covering both sides of the sheet. The measurement of a standard plasterboard sheet is a length of 2.4 metres in and a width of 1.2 metres, with a thickness of about 13mm. The board usually have either a bevelled or a bit flat edge. The bevelled edge makes it easy for the installers to use a plaster to smooth out the surface after nailing the sheets to walls and ceilings as well as taping the edges.
The plasterboard comes in different types. Although various manufacturers provide a unique name for their products, but they’re all included in one of the following categories:
• Water Resistant Plasterboard - This type of plasterboard are best suited to be used in water areas like bathroom, laundry rooms and kitchens.
• Acoustic Plasterboard - Due to its sounding proofing qualities, this type of plasterboard is preferred to be used in home theatres or noisy areas.
• Flexible Plasterboard - This is to be incorporated on curvy surfaces.
• Fire Resistant Plasterboard - Just like the name implies, this type of plasterboard is best suited for use in high fire hazard areas.
If you’re about to kick start some small renovations around your house or office, using a plasterboard to clad your walls is a very simple and worthwhile task. However, if you want to do major renovations or need to apply plasterboard to your ceiling, the best option would be to leave it to a seasoned professional.
How To Plasterboard A Wall
If you’re looking to plasterboard your wall, one of the essential things to have in mind is that the plasterboard must be hung horizontally and not vertically. Due to the way they’re manufactured, plasterboard sheets normally possess a “grain along the length. This implies that, it’s only when they’re firmly placed perpendicular against the wall that they’re able to achieve their maximum strength. Materials you’ll need to complete this task includes: Tape measure, stanley knife, pencil, spirit level, drill driver or screw gun, surform, drywall screws and handsaw. Now let’s have a look at the wall plasterboarding steps!
• To plasterboard a wall the first step to take is to place each board in such a way to make the edges the centre of the noggins and upright. Also, the the adjoining walls and door openings should fit closely to the edges.
• Work from the door opening to the ending wall. From the the stud’s edge to the noggin’s centre, use your tape measure to measure a cut board and as a rule to mark up.
• Place your spirit level on the marks and use the Stanley knife to run a line along the intended cut. Once done, turn the board on its edge and give a sharp push on the back to split.
• Cut the paper left with the knife after folding the split edge back on itself. This way, you should get a nice and clean edge.
• In its right position, place the board up against the studwork. Install the screws on the board’s edges where a noggin or upright can be seen.
• Mark lines down across the board at the stud’s centre.
• Cut the end boards to length.
• Install the remaining boards as mentioned above. While doing this, make sure the factory edges are together.
• Cut any board extending into an opening and finish the edges using a surform.
We’d recommend you hire the professional services of a plasterer for the best results especially if you lack the necessary training or experience. Plasterboarding a wall can be a tricky challenge and you’d save yourself some time, money and effort by getting it right on the first trial.
We can help you get more plasterboard dry lining work with our qualified job leads and boost your business.
Join today