Wooden Decking in Inveraray

Request Wooden Decking Prices in Inveraray

Trustpilot 4.5 stars
Home > Gardening & Landscaping Projects > Wooden decking > Inveraray

Wooden Decking in Inveraray

Wooden decking is an increasingly common option for providing outdoor seating areas in gardens. Due to the natural beauty of wood, they can be very elegant spaces which you can use year round by installing additional heating and illumination. Wooden decking is commonly fitted in locations in front of patio or French doors where they can create a smooth transition between interior and exterior spaces. Wooden decking can come in any size or shape to match any area. Curved designs or large areas linked by pathways can create a striking effect. Wooden decking is relatively quick to install and causes little disruption, particularly when compared to other possibilities like patio or paving. It could even be installed over the top of an existing patio. It is important however to make certain that your wooden decking is structurally sound and able to take the load of any furniture or plants that you want to use on the decking. There is a choice of varieties of wood that can be used in wooden decking. Generally decking is made of hardwood, but there are softwoods available that fulfil the durability requirements. As hardwood decking will need maintenance, which generally entails yearly cleaning and staining for weather proofing, composite woods have become more popular for use in wooden decking because they are stronger and require significantly less maintenance.

Average Wooden decking cost in Inveraray

The typical cost of Wooden decking is £1500. Costs can change based upon the materials and the firm hired. The upper price range can be as high as £1725. The material costs are commonly approximately £375

Average price per Wooden decking job in 2026

Avg. price low

Avg. price low
£1,125
Avg. price

Avg. price
£1,500
Avg. price high

Avg. price high
£1,725

£1900

£1425

£950

£475

£0

Prices based on actual Wooden decking costs for Inveraray, as reported by local LeadsDoWork members.

Wooden decking installation cost in Inveraray 2026

Labour cost £1,050
Material cost £375
Waste removal £75
Time frame: 1-4 days

Wooden decking searches in June 2026

Wooden decking Projects in Inveraray in May 2026

1,078

Requests for quotations in Inveraray in May 2026

0

Requests for Wooden decking quotations in Inveraray in May 2026. 0% change from April 2026.

0

Requests for Wooden decking quotations in Argyll in May 2026. 0% change from April 2026.

Source: Numbers calculated based on the search volumes in major search engines

Wooden decking searches in cities and towns near Inveraray May 2026

Wooden decking near you

Inveraray

Inveraray is a town in Argyll and Bute, Scotland. It is on the western coast of Loch Fyne, near its head, and on the A83 road. It is an ex- royal burgh, the old county town of Argyll, and ancestral home to the Duke of Argyll. In accordance with population estimates in 2010, the town has a population of around 603 people. The end product was an appealing town that included homes for estate workers, a woollen mill, and a pier to exploit herring fishing, which was to flourish in later years to play a significant role in the town's economy. Much of the town's progression happened in the late 18th century. The finished product is one of the leading examples of an 18th-century new town in Scotland, and the vast bulk of the homes in the centre of Inveraray are deemed deserving of protection thanks to of the town's architectural significance. There are a range of noteworthy tourist attractions in Inveraray. As well as the castle, the Georgian Inveraray Jail in the burgh is now a museum. Other interests include the Argyll Folk Museum at Auchindrain. The Celtic Inveraray Cross can additionally been seen in the town. The iron sailing ship Arctic Penguin is moored at the pier, along with the Clyde puffers VIC 72, Vital Spark. The Bell Tower looms over the town, and contains the second-heaviest ring of 10 bells worldwide. The bell tower is open to the general public, and the bells are rung frequently. In autumn 2014, PBS premiered a series, Great Estates of Scotland. Inveraray was featured in one episode, as was the current Duke of Argyll, head of the Campbell clan. For all of your home improvements, be sure to find reputable specialists in Inveraray to make certain of quality.

Looking for Wooden decking in Inveraray?

Get free quotes from local carpenters

Get free quotes

Wooden decking pros in Inveraray

JR Johnstone Roofing & Building

109 review(s)
Based: in Falkirk, FK2 9FD

Latest review

Jonathan F., FK8
4

Garden | Decking in Stirling

Company failed to attend the appointment twice and then did not get in touch to reschedule. Based on this I would not us...

See other Wooden decking Pros in Inveraray

Local & reliable carpenters near me

Tell us about your wooden decking project

Answer a few quick questions, so we can match you with local carpenters who can help.

Find up to 4 carpenters in Inveraray

Get free, no-obligation local wooden decking quotes from 4 verified carpenters working in Inveraray.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love Local Quotes it's a big part of my …

Love Local Quotes it's a big part of my Business I would recommend to anyone

FAQs

How to build a deck frame?
Building a simple deck frame, or decking subframe, that you’re laying on level ground is easy if you take time to prepare and get all the things you need. We’ll go through the steps on how to build a deck frame here. Tools and equipment To get building your deck frame, you’ll need:
  • Decking joists
  • Coach screws
  • Coach bolts
  • Combi drill
  • Socket set
  • A saw suitable for your project and the thickness of the timber
  • Pencil
  • Decking preservative
  • Sandpaper or sander
Build your subframe
  1. Measure your deck frame and cut to size if necessary.
  2. Make 2 pencil marks on each end of the frame’s 2 outer joists to mark where the coach screws will go. They need to align with the centre of the adjoining outer joist. Then, use a flat wood drill bit to drill recesses into each mark. Make them the same depth of the screws that your using’s head and wide enough for a ratchet or socket to tighten them.
  3. Using a thinner drill bit, line up the outer joists and drill a pilot hole through the middle of the recess. These pilot holes act as a guide for the screws and stops them from splitting the wood.
  4. Fit the coach screws with either a drill driver or socket and ratchet.
  5. Repeat the process for the inner joists once you’ve assembled the outer frame.
IMPORTANT: While you’re building your deck frame and the decking itself, remember to cover all pilot holes and ends of timber in decking preservative to ensure that your decking remains structurally sound for as long as possible. Though relatively simple, building a deck frame and the decking will take some time. It would be much quicker and easier to get a professional in to do it, who could represent more value for money.
How to make steps for a deck?
Unless you built a ground-level deck, you’re going to need steps to go with it. Check Building Regulations to see if you need to install handrails as well. It’s good practice to:
  • Have a step tread width of 900mm – if you don’t want them that wide, they should be no less than 760mm
  • Add a central step riser to stairs wider than 900mm to prevent them buckling
  • Add a step depth (the vertical distance between each step) of between 150 and 180mm if building your own riser, so the steps are at a comfortable depth
Getting started To build your steps for the deck, you’ll need:
  • Step treads (the actual step themselves)
  • Step risers
  • Coach screws
  • Deck screws
  • Saw
  • Drill
Make the steps for your deck
  1. Make sure the ground where you want to put your steps is level and firm. If it’s not, consider laying concrete or paving slabs to provide a secure surface for your steps to sit so they don’t sink.
  2. Grab some joist off-cuts and cut them to the same width as your step treads. Attach them to the step risers at the top and bottom using countersunk coach screws.
  3. Place the steps against the sub-frame of the deck; if you’ve put slabs down for support, make sure the steps sit in the middle of them. The longest edge of the stair riser should be on the slabs, and the short edge against the deck. Drill pilot holes through the step and sub-frame joist, then screw the step to the sub-frame with more coach screws.
  4. After drilling pilot holes, screw the treads into the risers at each end with deck screws.
  5. If you don’t want gaps between each stair, you can add joist off-cuts or deck boards. Measure the height and depth of the gap, then screw the off-cut or board into the step riser with two screws at each end.
How much decking do I need?
How much decking you need will – of course – depend on how big you plan your deck to be. There is an equation to help you work out how many deck boards you need. It’s a little complicated until you’ve been shown how it works, but once you know how to do it it’s easy to work out how much decking you need for any project. The equation takes into account the recommended 10% wastage and includes the expansion gaps that are required, which is between 5-8mm along the length of the deck boards (EGL, or expansion gap length) and 3mm along the ends of the deck boards (EGW, or expansion gap width) for timber. It also assumes you’re laying your decking horizontally, as if you’re looking for a diagonal or chevron design you’ll need more deck boards. Let’s go through an example, assuming you have a 10m x 6m area that you want to cover with decking made from timber boards that are 2.4m long and 144mm wide. We’ll use the EGL of 5mm and EGW of 3mm.
  1. Calculate the surface area for your decking Multiply the length (L) of your decking area by the width (W): L x W = Decking Surface Area (DSA) in m2 10 x 6 = 60m2
  2. Work out the coverage of your deck boards Add your deck board width (DBW) to the expansion gap length (EGL), then add the deck board length (DBL) to the expansion gap width (EGW). Then multiply these numbers. (DBW + EGL) x (DBL + EGW) = Single Board Coverage (SBC) 0.144m + 0.005m = 0.149m 2.4m + 0.003m = 2.403m 0.149 x 2.403 = 0.358m2
  3. Calculate the number of deck boards you need Multiply the SBC by 1.1 to allow for 10% wastage. Then, divide the DSA by the SBC. DSA / SCB x 1.1 = Total number of boards required 60m2 / 0.358m2 x 1.1 = 184.36 boards – so round up to 185 so you’re not left short.
If that all seems a bit complicated for you, let a professional do the maths – they will be able to give you an idea of how much decking you’ll need in no time.
Will I need safety barriers or balustrades for my decking?

If your deck isn’t going to be flat to the ground, it’s a good idea to have some kind of balustrade to avoid any tripping. If the gap between the deck and the ground is less than 600mm, use a 900mm balustrade. If it’s higher than 600mm, the balustrade should be 1100mm tall.

Wooden decking

Other Top Projects in Inveraray

Related Projects

Customer Reviews

Overall rating:


Inveraray Wooden decking installers are rated 4.7 out of 5 based on 4 reviews of 9 pros.
The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Wooden decking projects that have been connected with Wooden decking pros to help them. All Wooden decking contractors All Inveraray Wooden decking contractors

Useful Wooden decking Links

Are you a carpenter in Inveraray?

We can help you get more wooden decking work with our qualified job leads and boost your business.

Join today