Question 1

How much is a resin bound driveway?

Accepted Answer

Resin bound driveways are an excellent solution for your home. The stones, or aggregates, are sealed in a UV-resistant resin so they won’t move around and need sweeping all the time. But how much is a resin bound driveway? On average, the cost of installing a resin bound driveway is £40 per square metre. You should expect it to take between 2-5 days to complete, at a rate of around £150 - £250 per day. The total average cost, depending on how difficult the driveway is to lay, is approximately £2,300. Exactly how much a resin bound driveway costs will depend on a few things. If you’ve already got a concrete or block paved driveway, the contractors might be able to lay the resin on top, which will save time and money. But if not, or there are lots of cracks in the current surface, they’ll have to dig up the old one and prepare a new base and sub-base. The type of stone, or aggregate, you choose will also affect the cost. You might be tempted to opt for smaller size stones because they’re cheaper, but if you choose aggregate between 6mm-10mm wide, the drainage will be better which will stop water from pooling. It’s also cheaper to get a darker colour stone, because lighter stones will require a stronger UV-resistant resin to stop them from getting bleached by the sun in different places. While resin bound driveways cost more than asphalt or concrete ones, they last much longer. You can expect a properly installed and maintained driveway to last 25 years or more, while asphalt and concrete might only last 15.

Question 2

Are resin bound driveways permeable?

Accepted Answer

Yes – resin bound driveways are permeable. When a contractor lays a resin bound driveway, they mix the resin and aggregate (stones) in a forced action mixer. They then trowel this over a prepared concrete or bitmac base. Small gaps between the stones and resin mean that water can pass through, stopping pooling or flooding on your driveway. Having a permeable surface for your driveway is important because as the amount of built-up areas in the UK increases, water doesn’t have anywhere to run off to during heavy rainfall. This has lead to lots of flash flooding and damage to people’s homes. With a permeable surface like a resin bound driveway, water can filter through the sub-base and into the ground. Resin bound driveways, when installed correctly, are SuDS (Sustainable urban Drainage Systems) compliant and contribute to flood prevention. However, resin bound driveways are not to be confused with resin bonded driveways, which aren’t permeable. The resin is spread on the surface on its own, then the aggregate is scattered over the surface, where most of it will stick but some stones may remain loose. Because the resin is laid on as a complete surface, it doesn’t have the tiny holes that a resin bound driveway has, so the water won’t drain. It also means that the surface isn’t frost-resistant, so you might notice that it gets slippery. If you live in a particularly flood-prone area and you’re considering a resin driveway, it’s best to go for a resin bound driveway for its permeable surface. That way you’ll stop flash flooding around your property and contribute to helping the environment.

Question 3

How long does a resin bound driveway last?

Accepted Answer

Resin bound driveways are a great way to have an attractive-looking gravel driveway without the loose stones to clear up. The clue is in the name – your choice of aggregates (stones) are bound in resin to stop them moving; the surface is still permeable so water can drain away. So how long does a resin bound driveway last? When installed properly, you can expect it to last 25 years or more. But there are some things you need to do to ensure that your resin bound driveway lasts that long: Make sure the contractor uses the right type of resin Your resin bonded driveway will last longer if you choose the right kind of resin. It needs to be a UV-resistant resin so the sun doesn’t damage it, especially if you choose a lighter-coloured paving stone. Darker stones are more UV-resistant, so you might want to consider that too. Think carefully about the size of stone to use You might think that the size of the stones in your driveway doesn’t make a difference, but your resin bound driveway will last longer if you choose a stone of about 6mm to 10mm in size. This is because any bigger will affect the surface water drainage, potentially causing flooding on your property and maybe even damp in your walls. Keep your driveway maintained It’s vital that you keep your resin bound driveway maintained if you want it to last a long time. Make sure you hose it down and sweep it regularly to remove debris and maintain its porosity. When you clean your driveway, the water needs to be soapy, but don’t use chemicals or oils as this could damage the resin. As long as you look after your resin bound driveway, it should last you for decades. Just make sure you get a reputable company to install it for you.

Question 4

How to lay resin bound driveways?

Accepted Answer

It's pretty tricky to lay resin bound driveways. Most contractors will go on courses to learn how to lay resin bound paving or driveways to ensure that they get a high-quality installation that will last the customer decades. So while you could do it yourself, it’s probably best leaving it to the professionals. But if you want to know how to lay resin bound driveways, take a look at these rough steps to give you an idea. Prepare the base If you want your resin bound driveway to last a long time, you need to ensure that you prepare the base properly. Remove any block paving, grass or soil and dig down until you hit solid ground. Lay a sub-base of asphalt for good permeability. If you’re laying over the top of your current driveway, make sure that all cracks are increased into a ‘v’ shape with a saw and ensure the surface is dry and weed-free. Mix the resin You must follow the instructions on the materials you have to the letter if you want the curing process to work. Usually batches come in ‘Part A’ and ‘Part B’. Keep the resin container secure and on a protective surface to avoid splashing, then mix Part A for 10-20 seconds at a slow speed with a helical bladed mixer. Add Part B and mix thoroughly at a slow speed for about 2 minutes until it’s blended together. Mix the dried aggregates and sand with the resin Place a quarter of the aggregates into a mixer, then add the pre-mixed resin and start a stopwatch. You should then add the rest of the aggregates before slowly adding the sand. When you’re happy with that mix, stop the stopwatch. That time is the time that you need to spend mixing any other resin and aggregates to avoid colour variation. Lay the mix on the surface Transfer the mix to the work area then plan a laying route. When the mix is laid out, use a very clean trowel to spread the mix. Clean it regularly during the process to avoid dragging aggregates out of place. Once the aggregates stop moving in a fluid movement and become solid, stop trowelling. Then you can polish the surface to give it an attractive shine. It’s clear that laying resin bound driveways is not an easy task. It’s best to get a few quotes from reputable, experienced companies to lay your driveway for you.

Avg. price low	Avg. price low £2,813
Avg. price	Avg. price £4,250
Avg. price high	Avg. price high £5,513

	Labour cost	£2,450
	Material cost	£875
	Waste removal	£175

Resin Driveway in Northwich

Get Resin Driveway Prices in Northwich

Resin Driveway in Northwich

Average Resin bound driveway cost in Northwich

Average price per Resin bound driveway job in 2026

Resin bound driveway installation cost in Northwich 2026

Resin bound driveway on Google in Northwich

Google searches that showed Local Quotes, 19 July to 16 October 2026

1,577

Resin bound driveway near you

Northwich

Looking for Resin bound driveway in Northwich?

Get free quotes from local driveway installers

Resin bound driveway pros in Northwich

S & Q Driveways

Latest review

Trevor I., WS15

Resin Bound Driveway in Rugeley

Thomas Contactors

Latest review

Alanna V., SK7

Resin Bound Driveway in Stockport

SK Surfacing

Latest review

Adele W., L4

Resin Bound Driveway in Liverpool

Similar Customer Enquiries for Resin bound driveway in and around Northwich

Resin bound driveway

Resin bound driveway

Resin bound driveway

Resin bound driveway

Local & reliable driveway installers near me

Tell us about your resin bound driveway project

Find up to 4 driveway installers in Northwich

Hire with confidence

Our reviews

Average

Great search tool for builders.

Amazing service and professional se ...

Time Saver. Saved me a lot of tele ...

FAQs

Other Top Projects in Northwich

Need more help?

Are you a driveway installer in Northwich?