- Prepare the sub-base The driveway company will excavate, or dig, the existing surface down to a depth of around 200mm. They will remove any debris from the area may place it in a skip or arrange for it to be removed in another way. When they dig down to the sub-base of your previous driveway, they will assess how much hardcore they need and arrange for that to be delivered to the site. They will then spread the hardcore across the sub-base to create a level surface to pour the concrete on. Most good contractors will apply a gel to any walls and doors to protect them from concrete splashes. They will also add any gulley tops, manhole covers or shuttering that’s required.
- Installation and imprinting Next, the tradespeople will have the concrete either poured from a large mixer vehicle or barrow it in from a mixer and pour onto the surface. They level it with rakes, then add a colour surface hardener in a colour of your choice. This will give the driveway its permanent colour. They will then wait until the concrete has hardened to the correct consistency for imprinting the pattern, then will use special tools and stencils to make the pattern that you asked for. They will then spread a colour powder called a release agent over the surface, and leave to dry for 1 to 2 days depending on the weather conditions.
- Cleaning When the contractors return, they will add crack control cuts into the concrete. This is important because concrete expands and contracts in the heat, so there needs to be some give to stop any larger cracks from forming. Then everything is power washed clean, and a chemical wash is also used on the concrete to ensure it’s completely dust-free. The installers will ensure all your walls and doors are clean, which will hopefully be an easy job if they used wall gel.
- Sealing The final step is to seal the driveway. There needs to have been at least two dry days before the tradespeople can do it, so you might find it’s best to have your pattern imprinted driveway installed in the summer. The contractors will blow any debris away from the surface and dry any damp areas where necessary. They will then add an anti-slip agent to the sealant and brush it on. It’s best to not walk or drive onto your new concrete driveway for about 4 days after sealing to allow everything to set. But after that, you’re ready to use your new driveway!
Goodwick
Goodwick is a seaside town in Pembrokeshire, south-west Wales, directly west of its twin town of Fishguard. The coasts of Wales went through Norse raids during the course of the Viking Era and, in the latter 10th century, Norse trading posts and settlements ended up being set up. Goodwick was a small fishing village in the parish of Llanwnda, however in 1887 work commenced on a railway connection and harbour, and the village proliferated to service this. The primary industry is now tourism although in the town's industrial past brick making was once an important market. Some fishing still takes place on a small scale but most activity is centred on Milford Haven. The regional beach, Goowick Sands, is where the overpowered French invasion force gathered before their unconditional surrender on 24 February 1797. Fishguard and Goodwick railway station served local rail tourists from the town, and from neighboring Fishguard, before the line was essentially closed to such passengers by the drop in service to boat trains only in 1964. After this, trains merely served Fishguard Harbour and the station fell into disrepair. Following investment from Network Rail and Pembrokeshire County Council the station has actually now been re-built and was reopened for guests again, on 14 May 2012. It is served by the boat trains and the recently offered regional trains. The town is also served by the Fishguard town service bus, which runs alternately from Harbour Village or Stop-and-Call, originally a detached settlement, to Fishguard town hall. Two Fishguard to St. Davids bus routes also travel through the town. For all of your home improvements, make sure to identify dependable professionals in Goodwick to make certain of quality.
